Click below to subscribe to the Beginner's Cheats Season 4 column to watch 50 episodes including this one
There is an iron pile guardrail on the left side of the current parking place of the vehicle, which can be seen that the left front wheel is about 10 centimeters away from the iron pile, and the right body is also very close to the body spacing of the SUV with the head facing inwards.
Let's look closer, it's only about 10 centimeters,
On the left, look at the aisle environment of this inverted library from the aisle,
There is also a row of cars parked on the side of the road opposite the parking space, which should pay attention to the front of the car not to scratch these vehicles when reversing the warehouse.
Now drive the vehicle out and I'll show you the left side of the inverted library. Start with the left turn light and start by hitting the right a little direction to appropriately expand the arc of the left turn, paying attention to the left side of the car body in the left rearview mirror and not rubbing into the iron pile.
The vehicle reverses from the aisle and hits the left when the rear of the vehicle aligns with the left body of the vehicle on the left side of the parking space.
From the rear of the vehicle, the left body is about 60 to 70 cm away from the left vehicle front,
During the reversing process, the amplitude of the left-side hitting direction is appropriately adjusted according to the distance between the body and the iron pile observed in the left rearview mirror, and the stop is about 20 cm away from the right rear corner of the rear SUV on the right side.
Obviously, one can't move forward, hang forward gear to the right half a circle to drive forward, and then hang up the reverse gear to continue to reverse in the left direction, this time the rear of the car moved to the left to the right side of the SUV.
Hang up the forward gear again and hit the right to take a step towards the front, further straighten the body back to the positive direction of the stop,
Hang up the reverse gear to the left to let the body straight backwards into the position, after the second half of the body into place, back to the positive direction to continue to reverse, according to the left and right spacing appropriate fine-tuning direction parking,
After parking, open the driver's car door, just the iron pile does not affect the opening of the door.
From the entire narrow and irregular left vertical parking space inverted library, we will summarize that there are the following key points to grasp.
Since the parking space is much narrower than the entrance of the normal parking space, the narrowest distance left and right after parking is only more than 10 centimeters,
In addition, the width of the aisle is not enough to reverse the warehouse after straightening the car, so it is impossible to complete the reverse library by one hand, and it is necessary to adjust the body to the forward car back to the direction of multiple times, adjust the body to the straight state as much as possible, and finally complete the reverse library, without scraping the left and right obstacles;
Observe the distance between the left rear corner of the vehicle and the iron pile from the left rearview mirror,
As the rear of the car to the left to draw an arc reverse, the distance between the body and the iron pile is getting closer and closer, as long as the distance is not less than 5 cm to continue to hit the left direction, when it reaches about 5 cm, go back to the right to turn back a little in the direction and then hit back, the control of this distance is controlled by the steering wheel, hit the left side to the left, and open the distance to the right.
As the body approaches to the left, look back at the right rearview mirror, and the right front door handle is still some distance away from the rear car body, indicating that the distance is still relatively far, but the left side of the body has already fallen over the iron pile into the rear.
In order not to let the left side of the car rub into the iron pile when picking up the car in the right direction, it is necessary to stop and return at this time. Hang up the forward gear and hit the right direction, drive a little forward, why can't you open a little more forward? If you drive more forward, the left rear of the car will be thrown to the position of the iron pile, so that the inverted warehouse will not be able to carry,
So at this time, the parking hangs upside down and then falls down, this upside down can be seen due to the further straightening of the body, the left space is larger than just now, looking back at the right rearview mirror can see the right rear corner of the right vehicle.
A step further ahead, from the right rearview mirror has seen the two cars almost intersecting,
Hang up the reverse gear to the left to hit the direction to let the body straight to see the rear of the car throwing to the left, both sides of the body have seen that there is space, you can reverse into the position.
Second, from the aisle backwards to the left to hit the direction of the starting point determines the need to adjust a few to straighten the body and let the rear of the car align the entrance to the parking space, if the starting point of the direction is too early, the left rear corner will be to the top of the iron pile, to the left direction will be too late will be the top to the right side of the SUV;
We can now see that this is the starting point of the left body and the left side of the vehicle front distance of about 60 to 70 cm, if too far to the right, when reversing over to the left direction, the front of the car to the right draws an arc, it is possible to scratch to the right side of the vehicle, even if the scraping can not be scraped on the right side of the vehicle, then the first can not go back to the front of the car when the width of the aisle is not enough. If the left distance is small,
When the left side is reversed, the left rear corner will quickly top the iron pile, and even if the vehicle moves to the right when the second one is hit to the right to the front of the car, the gap is relatively large.
Third, the left and right spacing will be slightly different when the rear of the car is put into storage, if you want to keep the body centered and straight, you need to fine-tune the direction by observing the rearview mirrors on both sides during the storage process. In the process of the vehicle going straight forward, in fact, the right side of the vehicle parking is a little oblique, then take him as a reference, my car will not be too positive,
Therefore, in the process of reversing the car and finally getting it in place, make your vehicle as correct as possible by fine-tuning the direction left and right. After the parking is completed, let's take a look at the effect after the parking from the opposite side.
Dear old and new friends, a total of 50 videos of "Beginner Cheats - Season 4" have been updated