Click below to subscribe to the Beginner's Cheats Season 4 column to watch 50 episodes including this one
In the last episode, I demonstrated the technique of adjusting the body through narrow aisles and turning left, mainly demonstrating the idea of passing in this limited environment.
Today I will show you how to judge the distance in the car under such conditions and which positions to focus on and how to pay attention:
First, before turning into the passage between the two cars, how to judge the front of the car to straighten the body?
The vehicle is in a swing state, you can see the passage to the left of the gray car, slightly to the left of the direction towards the gray car.
When the lower right edge of the front windshield is aligned to about 30 cm in front of the gray sedan front, hit the right and let the front of my car draw an arc to the right along the gray sedan front and turn right.
Under the front windshield can be seen the position of the alignment to the gray sedan gradually raised,
When the front left corner of the two cars is facing each other,
Inside the car, I saw that the lower edge of the front windshield was aligned to the upper edge of the left headlight of the gray car, and it was judged that there was still about 20 centimeters of space in front of it, and it could be safely turned into the passage.
The trick of this entry channel is that the vehicle straightens the body before entering the passage, and the straight method is to use the right turn to drive towards the front of the gray car first, and turn right at the front of the gray car.
If you start directly towards the aisle, the vehicle will enter the aisle in a swing state, and the right body will rub into the left rear corner of the right vehicle.
Second, how to observe the rearview mirrors on both sides without scratching when passing through the passage between the two vehicles?
After the front of the car enters the two cars in a straight body state, the first thing facing is the rearview mirror of the left vehicle, first of all, the left rearview mirror of my car covers the left vehicle rearview mirror.
As the vehicle moved forward, the opposing rearview mirror began to emerge from the part of his body, and the more it came.
This shows that the two rearview mirrors are close, at this time to look at the rearview mirror in the process of approaching the distance between the back and the back of the two rearview mirrors, when the back to the back, see if there is a gap in the outer edge of the two rearview mirrors, if there is a gap can be passed, if there is no gap, to the right to leave a gap.
Next, look at the right rearview mirror, first my rearview mirror blocks the rearview mirror of the right vehicle,
As the vehicle advances, part of the rearview mirror of the right vehicle is exposed, and the right rearview mirror is seen to be in a state of collapse, so that you can pass with confidence.
When the rearview mirrors on both sides are about to pass, we must slow down the speed in advance, observe it well, stop when it is time to stop, and if you can't go, you have to hit the opposite direction, but the amplitude is not too big and too fast, let the two rearview mirrors stagger the prevail, and then return to the positive direction after the wrong opening.
Third, when turning to the left, how to judge the obstacles in front of you and the left side of the body are not scratched?
After passing through the right rearview mirror, you are faced with a left turn on the obstacle-prone crosswalk in front, look at the electric vehicle in front of you, and use the width of the aisle in front of you first.
When the lower edge of the front windshield is about aligned to the height of the electric vehicle 30 cm, hit the left direction,
Since the left side of the car is relatively close, take the direction slightly to the right before turning left, and then hit the direction to the left.
In the case of using the width of the aisle in front of the foot and the width of the right side of the foot to the right, it is necessary to observe the left rearview mirror and pay attention to the left distance. When the driver's left shoulder position is aligned with the left rear of the car, hit the full left direction,
While observing the left rearview mirror, while alternately observing the left turn in the front direction, as long as the left body and the left vehicle always have a distance to continue to turn, if the spacing is less than 5 cm, you should return to the right appropriate direction, and then turn out in the direction of the left.
A successful left turn on the narrow road is the result of the coordination of the three points, the first is to judge the distance ahead and ensure that the obstacles in front of you are not scratched when turning left;
Under this premise, take the right to expand the turning radius in the direction, and then turn left; the third is to hit the left in the direction of the full time can not be too early, play early, the left body will scratch to the left rear corner of the left vehicle, at least then a turn can not come out.
Okay, the narrow road turns through, the key points in the car are judged not to scratch the skill, and the demonstration is completed.
Dear old and new friends, a total of 50 videos of "Beginner Cheats - Season 4" have been updated