Click below to subscribe to the Beginner's Cheats Season 4 column to watch 50 episodes including this one
With the popular use of reversing images, the driver's dependence on reversing images is also getting higher and higher, if there is no reversing image on which day, some friends really do not know how to judge the distance behind the car, so this craft can not be lost. Below I will use the method of observing the rearview mirror to explain how to judge the distance of the wall behind the car.
Hang up the reverse gear to start,
In the reversing image, you can see that the green line is just aligned in the corner of the wall when you stop,
Looking in the left rearview mirror, in the left rearview mirror you see that the front door handle has just covered the corner,
Now the car behind the measurement of the actual distance is what is, after the actual measurement, the distance between the rear bumper and the rear wall is 113 cm;
Hang up the reverse gear to start, now continue to reverse,
In the reversing image, you can see that the yellow line is just aligned in the corner of the wall when you stop,
In the left rearview mirror see that the front door handle is aligned to the corner of the wall in the middle position,
Now the actual measurement under the car, after the actual measurement, the distance between the rear bumper and the rear wall is 80 cm;
Next, continue to reverse,
Stop when you see the red line just aligned in the corner in the reversing image,
In the left rearview mirror you see that the corners have been aligned to the lower edge of the mirror,
Now the actual measurement under the car, after the actual measurement, the distance between the rear bumper and the rear wall is 50 cm;
Next continue to reverse, in the reversing image to see that the red line has climbed up the wall, the lower edge of the reversing image has been aligned to the corner of the wall,
Visually see in the right rearview mirror that the front door handle on the right side is aligned to the corner,
Now the actual measurement under the car, after the actual measurement, the distance between the rear bumper and the rear wall is 30 cm.
After the above reversing demonstration, we summarize as follows:
First, by observing the reversing image, when the green, yellow and red lines are aligned with the wall corner, we know what the actual distance represented is;
Second, by observing the reversing image and observing the left and right rearview mirrors to verify each other, we can know the distance represented by the green, yellow and red markings seen in the reversing image, and how to observe it in the rearview mirror, so that in the absence of a reversing image, we can find a sense of distance by seeing the change in the corner of the wall and the position of the car body marking seen in the rearview mirror.
Third, when the final closest distance is observed, because the angle of the left rearview mirror is higher than that of the right rearview mirror, it is changed to observe in the right rearview mirror, and usually as long as it can be seen in the left rearview mirror, the left rearview mirror is mainly observed.
The above method of using the observation mirror to judge the distance of the wall behind the car will vary depending on the model, height, sitting posture, height of the rearview mirror adjustment, and different habits, please use it according to your actual situation.
Dear old and new friends, a total of 50 videos of "Beginner Cheats - Season 4" have been updated