Click below to subscribe to the Beginner's Cheats Season 4 column to watch 50 episodes including this one
The picture seen now is when the vertical parking space is out of the garage to the right, because this white car is parked in the aisle just to block the vehicle out of the garage, the distance between the left front corner of the vehicle and the front car is about 2 centimeters, and the distance between the middle of the right body and the left front corner of the micro-surface is about 2 centimeters. At this time, the direction is already in a state of filling to the right, if you continue to go out of the warehouse, the right side of the body will be squeezed to the micro-surface, and the back to the positive direction will be on top of the front car.
When you encounter this kind of limit, don't force out of the library, and the original way back will not scratch when the direction is not moving.
So is there any good way to get out of this limit library and ensure that it does not scratch? Theoretically, as long as the space is large enough objectively, it is possible to come out in the case of grasping the three points of view, which requires accurate judgment of the distance and reasonable adjustment of the attitude.
This objective space includes two aspects, one is that the vehicle can tilt the vehicle to the greatest extent without scraping the left and right vehicles.
The second is that when trying to adjust the body swing posture, the rear of the car and the vehicle behind should have a convenient distance of forward and backward movement. That is to say, the purpose of the front of the car to the right swing is to make the body as close as possible to the straight between the left and right obstacles, so that the front of the car swings to the right, the tail swings to the left, and the rear of the car and the vehicle behind need to have a certain space to facilitate the forward and backward movement in the process of this pendulum.
Grasp the three points of view: First, the distance from the front white car, mainly when turning right to the limit position, to ensure that the front bumper can not rub the front car;
Second, observe the limit distance between the right body and the right vehicle through the right rearview mirror to ensure a certain dynamic clearance;
Third, when adjusting the body posture of the reverse, the left rear corner cannot be pushed to the left side of the vehicle through the left rearview mirror.
Under the premise of the above three points of view, it is also necessary to have a clear plan for the way out of the warehouse, we look at this parking space, the vehicle is initially parked in the center, the first step is to first approach the black car on the driver's left side, and the distance to the rear sight mirror is not up to the standard.
Take a step back, then head left,
Straighten the body in the right direction during the forward process, return to the right direction before stopping; take another step back;
Hit the left in the direction of the retreat, back to the right,
Then stop back in the right direction, now complete the approach to the left side of the vehicle. This purpose is to expand the turning radius to the right when hitting the right direction out of the library, so as not to turn to the right micro-surface at once;
The second step is to make the body adjustment in front of the garage in the direction of hitting the right, because it is impossible to get out of the garage, then the front of the car should be swung as far as possible to the right, and the rear of the car should be swung to the left. The first step is to head in the right direction and go back to the right direction before stopping to prepare for reversing;
In the second step, alternately observe the left and right rearview mirrors, and reverse in the direction of hitting the left;
The third step, observe the distance in front of the car, go a little bit in the direction of the left, then hit the direction to the right, and make another attempt to make a library attempt. This process of swinging your head to the right and tail to the left may need to be repeated several times until you can adjust to the point where you can come out.
Now from the four perspectives of the picture to see the process of out of the warehouse, please pay attention to the tire direction change and the left and right rearview mirrors and the state of the front distance, from which to learn the coordination skills of this out of the warehouse link. First, head out in the direction of hitting to the right,
This one can't come over, and when you feel the front approaching the car in front of you, stop back in the right direction.
Hit the left to slightly reverse the direction, then hit the right direction to continue out of the library, pay attention to the left rearview mirror, at this time mainly look at two places, one is the right rearview mirror to see the gap between the two cars, one is to judge the limit distance of the front car.
When the left front corner comes out a little later, because it has been playing to the right full direction state, the right body clearance has reached its limit, and it is necessary to drive forward through the positive direction, but it cannot be fully returned to the positive, because the left front corner will also rub against the full return to the right. At this time, the main master is to the right side of the limit rubbing is not the standard, slowly open out.
If you are not sure about the front at this time, you can pull the handbrake in neutral gear to get out of the car to see, or you can have a person under the car to give you a command, mainly report the left front corner distance, because the right side has a rearview mirror can be observed very clearly.
Now continue to go forward, the right side may be scratched, hit a little direction to the right a little bit, adjust under the premise of not reversing the right front corner of the front bumper, play a little direction to the left, because the left front corner has come out of the left rear corner of the front car, so the gap is expanding, playing a little to the left will not scratch, and the right side is almost so bad,
Now you can see the vehicle driving out little by little. After the front of the car comes out, you can't rush to the right to hit too much, because the right side of the body is not completely out,
While observing the right rearview mirror, slowly hit the right side of the car without scratching the right body, and drive the car completely out.
Okay, the aisle has a car occupying the road, and the limit distance is not scratched out of the library to complete.
Dear old and new friends, a total of 50 videos of "Beginner Cheats - Season 4" have been updated