In the examination project of the third subject, as long as the students of C1 have a deep experience, adding or subtracting files is a project with considerable difficulty in operation. In the course of the examination, mistakes due to the addition and subtraction of the file abound. Today's topic, let's talk about it, how to smoothly increase or decrease the file?
First, how to accurately hang the gear?
If you are not even familiar with the gears, or can only look down at the gears, the exam will be difficult to pass. When Coach Shi teaches the third student, he will let the students familiarize themselves with the gears in situ, raise their heads and look ahead, and blindly practice the correct hanging posture.
Especially error-prone gears: for example, two gears increase three gears, or three gears subtract two gears. In these several gears, students can easily stray into other gears because of excessive force or incorrect gestures.
For example, it should have increased three gears, but it was pushed obliquely to one or five gears, which should have been reduced to two gears, but it was hung on the fourth gear.
Similar to the above phenomenon, most of them are caused by the usual hasty practice, the movement is not in place, and the position is not accurate.
When I am a teacher, I will let them hold the gear head downward in the palm of their hands, first feel the position of the neutral gear, and then gently and accurately experience the difference between the first, second and third gear and fourth gears, and the strength of the wrist turn.
After practicing this blind operation for a while, the trainees are further required to move coherently and fluently.
Second, hand and foot coordination and cooperation
After the first step is to find the correct gear, the next step is to train the hand and foot cooperation. For new students who are just learning to practice, throttle, clutch switching and gear shift coordination are a problem. It is common for the students of the third section to stop and stop the fire, increase the gear and channel the car, and downshift the setback.
Increase the gear channeling car because the speed is not dare to speed up before changing gears, for example, after increasing the third gear under the second gear speed, because the speed does not match, the car will shake after the suspension, the student will give oil under a nervous foot, and pull up the speed by the throttle, and the right foot gives oil at the same time, the left foot is still clutching, this abnormal operation, what is heard in the ear is the engine angry and suppressed roar.
When the throttle under the foot is getting bigger and bigger, the left foot is slow to leave the clutch pedal, and the car that is holding back will naturally sneak out like a wild horse.
As for the downshift setback, it is the same reason, almost 90% of the third subject students do not slow down. After the gear change, he did not dare to give oil, the left foot clutch suddenly lifted, sitting in the car experience like a horse running at full speed, suddenly the front hoof fell into the pit, eager to throw people out immediately.
If you let the exam system and examiners enjoy both experiences, the exam results can be imagined.
Coach Shi teaches the three students, will take the lead in dismantling the action, step by step practice proficiency, and then combined together, repeated practice for about half an hour, the student can grasp the essentials, smooth connection.
Of course, after class, I will instruct the students to sit in a chair when they go home and simulate the above movements. If you go to the driving school two or three times, you will form a muscle memory, not only can you pass the exam smoothly, but also after taking the driver's license, you will open the manual gear, and you will also operate freely.
Well, the topic of the addition and subtraction of the three sections is here, welcome everyone to continue to pay attention to Coach Shi talking about driving, tell me your problems, I will discuss and share with you.