With the continuous upgrading of automatic cars, more and more people today will choose automatic cars when buying cars, which is simpler to operate than manual cars. However, the seemingly simple operation of the automatic car also hides a lot of operating skills, such as the automatic car should start to release the handbrake, or the problem of hanging the gear first, even many old drivers do not know. Today Xiaobian will discuss this problem with you.
Many car owners often release the handbrake first when starting the automatic car, and then hang up the gear to start the vehicle, but this is wrong. If we hang directly to d gear after the car is ignited, it will invisibly pass through the R gear, which will cause a reverse impact on the car gearbox, thus affecting the service life of the gearbox.
Therefore, the automatic transmission car should first step on the brakes when starting, then hang the gear to n gear, then ignite the gear to d gear, and finally slowly release the handbrake to complete the start. Although this is a lot more tedious, this step sounds cumbersome and does not cause damage to the gearbox. And many people sometimes park the car in a place with a slope, if you release the handbrake first, it may cause the car to landslide, which is very dangerous. Therefore, everyone must first hang up the gear when starting the car on the ramp, and then release the handbrake before driving, so that it is safer.
After talking about the automatic transmission car should first release the handbrake or hang the gear first, then Xiaobian came to talk to you about the correct steps for the manual transmission car to start. The manual transmission car must first insert the key when starting, then turn on the ignition switch, start the engine, and observe whether the fault light in the dashboard is on. If the indicator light in the dashboard is always on, indicating that there is a fault in the car parts, we must immediately turn off the engine to check the car.
If the fault light on the dashboard is not on, we can start the vehicle normally. Manual transmission car in the start to first step on the clutch pedal, and then the gear lever into the 1st gear, after ensuring the safety of the surrounding situation, then release the handbrake, lift the clutch pedal, while slowly stepping on the accelerator pedal, so that the vehicle can start slowly. However, everyone must pay attention to slowly lifting the clutch when releasing the handbrake, otherwise it is easy to cause the car to stop.
Many car owners like to start with the second gear when starting the manual transmission car, and feel that they can hang up the gear less than once, which is more convenient. However, this side of the small editor is not recommended that you start directly with the second gear, because doing so will not make the car start faster, and the continuous semi-linkage will also increase the clutch wear.
In addition to starting with two gears, some car owners even like to start directly with three gears when starting manual cars, and three gears not only take longer to start, but also cause more wear and tear to the clutch, and the car is easier to turn off. So when you start the manual car, you still honestly start in one gear.
Today's precautions for starting automatic cars and manual cars are here, do you remember?