In the third subject, there is a project that is overtaking, in fact, the current automatic car only needs to hit the turn signal in the process of overtaking. In addition, it is to control the steering wheel and overtake at the fastest speed to complete this exam. It's just that for those manual cars, they must shift gears when overtaking, and most people feel that manual cars must be upgraded when they overtake.
Such a car will have the power to complete the overtaking situation, in fact, when the manual car we drive shifts gears, it must be downshifted. There are many people who do not understand this matter thoroughly, in fact, everyone should be more aware that overtaking itself is a particularly dangerous thing. If you want to exceed the fastest vehicle in front, you must give the car enough power and torque.
The low-gear torque of the car is also greater than the torque of the high-end position, so if you want to get a relatively large torque and complete the overtaking, then you must downshift. A particularly large number of novice drivers do not understand this matter, should not be in the process of overtaking the gear should be raised? Only by raising the gear higher, the car will run faster, and we usually drive to accelerate when we are also upshift.
Why do you need to increase the speed of the car when you are in the car, but the low gear, in order to be able to provide more power and torque to the car? Because when overtaking, lifting the gear is also an operation for the gearbox, and the power of the gearbox itself comes from the engine. If the engine provides more power, the higher the gear, the faster the car will run. When the car accelerates, if the upshift is relatively early, the car does not have any power, so the engine cannot turn.