The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5, a small sports car with a front-center rear-drive layout, a 50:50 front and rear ratio, and a convertible design, has captured many car-loving "machos" by it. Today, I will share with you an MX-5 NC created by a car friend from Guangdong.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
"This MX-5 was purchased by me in 19 years, when I was looking for a manual Toyota 86, I accidentally came across this cute MX-5, I thought about test driving, after the test drive found that the convertible ride is too romantic and comfortable, so I did not hesitate to buy it."
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The day after Fang Fang bought the car, he directly put a set of Tein FZ grinding gear suspension with a set of BBS RG wheels to complete the first step of evolution.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
Then a RES 4-1 head section + single out cannon in the middle and tail section followed the car, and also diy the fast top rear anti-collision beam, which has a bad taste of JDM.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
Because Fang Fang takes the competitive route, a good set of brakes can not be less, and a set of AP 7600 brake sets is put on the car. At the same time, the wheel hub was also replaced with a more combatable Rays 57g, with the V02r tires of the Shangwei Tu.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
For a car that runs mountains every day and occasionally plays off the track, the above modifications are enough. But Fang Fang said that playing JDM, manual transmission is the soul! In addition, many of his previous trolleys were all manual transmissions, so he had the idea of automatic transmission to manual transmission.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
Fang Fang is more paranoid about manual transmission, he has played before the BMW E90, Audi TT, Volkswagen Golf 6R, Toyota Yaris, etc., all of which are manual transmissions.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
Fang Fang, who had an idea, immediately began to act, directly from Guangdong to the modding shop in Suzhou to transplant the handwave. Replaced with a 5-speed manual transmission and a nikko hand wave computer, everything went smoothly and was a perfect transplant. Unlock a brand new Mazda MX-5 NC.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
In addition to the porting of the manual wave box, there is also a set of LSD modified by the S2000 Tousen LSD, with a special version of the NSK bearing, perfect for the MX-5, tight seam.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
"The actual feeling after installing that 'magic change' LSD, the lock rate is very stable, the rear axle grip is more linear, and the lock rate does not change during the tire slippage process. Scenes such as tracks and drifts are perfect. The low-speed turning click is also very slight, and there is a noticeable lock at a speed of more than 3000 rpm. "
After the big project was tossed, Fang Fang began to clean up the small details. In terms of interior, the MOMO P1 steering wheel with D1 quick release, Bride zeta second-generation barrel chair, as well as Takata four-point seat belt, Razo340g gear handle, Razo heel pedal blessing, this completely transformed into a very fun to drive the sports car.
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
"Because the bucket chair was uncomfortable, I replaced a set of Recaro SR5."
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
"The MX-5's modification project also ended here, and the entire modification process cost about 110,000 yuan. The overall vegetarian looks very comfortable, it is very cool to open, and it is quite balanced. "
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
"I met a lot of like-minded friends on this road of modification, and there were also a lot of 'big guys' to help."
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
"At the moment the car already has a new owner. During the NC, I was fascinated by the old car, the next time you see me may be driving a very retro domineering car? "
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
The Mazda MX-5 NC, which was transplanted from the handwave, was more than just disassembled
