The speed matching table corresponding to the third gear is: the allowable range of the first gear is 0 to 20, and the time to change the second gear is 15 to 20; the allowable range of the second gear is 10 to 30, and the time to change the third gear is 25 to 30; the allowable range of the third gear is 20 to 40, and the time to change the fourth gear is 35 to 40; Note that the third gear must not exceed 40 during the examination. The allowable range of the fourth gear is 30 to 50, and the timing of the fifth gear is 45 to 50.
Subject 3 car gear and speed specification: 1 gear: 0-20 yard 2 gear: 5-30 yard 3 gear: 15-40 yard 4 gear: 30-55 code Discipline 3 The largest car gear is specified as four gears, which is converted in the straight line of the section 3.
Hanging method:
1. When the car starts, it should be developed in a gear. When hanging gear, be sure to step on the clutch to the end, otherwise it will be difficult to hang the gear.
2, gradually shift gears, speed up gearing, downscaling rate and gear must be paired, gear shifting is only one level, can not cross levels, gear shift must first reduce the rate, and then go to shift gears. If you accidentally hang incorrectly, you can crush the clutch and hang the gear again.
3, the gear change should be fast, more stable. When the gear must be adjusted, once the rate drops, it must be quickly shifted, it must be fast, and the 100-meter plus-minus block is the speed of the test students' shift.
4, to prevent looking down at the gear conversion gear to according to the speed ratio of the car, can not look down at the gear, the field of vision looks straight ahead, observe the real-time road conditions anytime and anywhere, for students who are not skilled in the conversion gear can learn to train more at the driving school, when practicing the car, we must cultivate the habit of preventing looking down at the gear.