The new driver is starting to be turbulent, and it will definitely take a while to adapt. At the beginning, the start was on fire, the low gear was high speed, or the gear change was frustrated. Let's talk about how to practice when the novice driver just drove to avoid the occurrence of this situation, first of all, ah start to turn off, that is, you did not find the clutch point, finding the clutch point is very simple, ah, with their own car to try it can be hung into a gear. Then you step on this clutch pedal to the end, and then you slowly loosen this clutch, and when you loosen to a certain position, you will feel that your car wants to move forward, this point is the position of the clutch point, in fact, this is very easy to find. Find yourself an empty word when you go to the car, the road section, and step on it when you pull over. Then, at a point, then the brake stops, and then it goes to lift the clutch, and then find this clutch point to do it back and forth a few times, so as to find out how much this trip is.
The next time you step on the clutch, you can directly step into place and lift it to the clutch point. After finding this clutch point, it is free to cooperate with the clutch pedal, and then after stepping on the clutch point, the right foot gives a little bit of throttle, and then the left foot is slightly stable on the clutch pedal, and then gives some throttle, and then completely release it. This free with the monthly exam, the more stable you start, the less likely it is to turn off, to practice this clutch point. Looking for this position, in fact, do it a few more times, ah, naturally I have a feeling.
The next time you shift gears, lift this position to the clutch point, and then it's about lifting. Here remember a sentence is upshift, look at the speed downshift, look at the speed ah. This speed is generally about two thousand revolutions forward for a family car. For example, if you drive a gear, start, you can change to second gear after starting, the second gear is about two thousand turns and then rises to three gears, and the third gear is two thousand to four gears. Then push up gears and downshift to see the speed. For example, if you are in third gear, your car can drive to about forty, but when you are driving forward now, then, you are driving to seventy per hour, and you have used the fifth gear. But there is a slight congestion ahead, you need to slow down, then slow down to forty, reduce to forty and then go forward. At this time, step on the pedal of the clutch, and then push the gear directly to the third gear, and then step on the accelerator to shake forward.
Remember, upshift to see the speed downshift, look at the speed of the sentence, at the same time there is a point about the upshift downshift, ah, it means that you clutch pedal you lifted fast, just say that after you stepped on the clutch, you upgraded ah. Then you stay at the clutch point a little, a second or so, time a little bit, and then completely release the clutch pedal, this is to eliminate the frustration. The above points are personal experience, I hope to help some novice drivers. Don't forget to like and follow the last likes, we'll see you next time. bow.