6 tips for cold storage installation that you may not know yet
#冷库安装技巧 #
1. Cold storage needs to be installed in a place to avoid rainwater, for small combined cold storage, generally speaking, it needs to be installed indoors; when installed outdoors, it is also necessary to install a roof or steel structure that blocks sunlight and rain;
2. The cold storage should be installed in a place with high ground strength and stability, which is relative to the combined cold storage, this type of cold storage needs a horizontal concrete base when installing, and when the base is tilted and bumped, the base must also be repaired and flattened;
3. When the cold storage is completed after installation, sometimes condensation will occur before the concrete base dries thoroughly, that is, when the humidity such as the rainy season is abnormally high, condensation will appear at the seams of the library board; when in a very small case, condensation will also appear in the renovation of the library board, which are temporary phenomena, so it is necessary to wipe when necessary.
4. The cold storage needs a horizontal concrete base when installing, and the base needs to be tilted and bumped, and the base must be repaired and leveled; it is also necessary to remind that the cold storage machine needs to be installed in a well-ventilated and low humidity place;
5. When the cold storage is completed, condensation will generally occur before the concrete base dries out, and these are temporary phenomena, but what we need to do is to wipe it when necessary; it should also be noted that the cold storage needs to be installed in a place that can be sheltered from rain; among them, the combined cold storage is generally installed in the house, and when it is outside the house, it is necessary to install a device to block the sun and rain;
6. The drainage facilities of cold storage are a very necessary link, so special attention needs to be paid to when installing cold storage. Because its cold storage will often have water discharge, so it is necessary to guide the drainage to a place where it can flow smoothly, and at the same time, a U-shaped pipe must be installed on the drainage pipe, because its U-shaped pipe can effectively prevent the leakage of cold air, insects, rats and the corrosion of the unit, so it is necessary to install the facilities. #冷库安装 #
