A 33-year-old man in Ganzhou City, Jiangxi Province, was puzzled by the bricklaying techniques of master mud water. He took photos of the scene where the master built the inclined bricks and sent them to the internet. outcome

A 33-year-old man in Ganzhou City, Jiangxi Province, was puzzled by the bricklaying techniques of master mud water. He took photos of the scene where the master built the inclined bricks and sent them to the internet. As a result, it caught fire in an instant. Many experienced netizens said: This is the top of the oblique masonry!

It turned out that the man was in the dried pepper business. After three years of operation, he earned 480,000 yuan. So he spent 500,000 yuan in Ganzhou City and bought a house, but he had to decorate it himself. So he hired a mud water master. When he was overseeing his day-to-day work, he saw such a way of bricklaying, and he said he had never seen such a bricklayer. He was confused and very afraid that the Mudwater Master would cut corners in his work and materials. So he took some pictures and sent them online for inquiry. Therefore, he received a lot of replies from netizens!

Some netizens said: This should be called centipede feet. The advantage of this is that after filling with cement mortar, it is conducive to making the brick wall below and the floor slab (beam) above more tightly and more firmly connected, like a centipede foot, ensuring the "hot expansion and cold contraction" space of the building, and effectively reducing the risk of cracking at the junction of the new wall and the floor slab (beam).

Some netizens said: This is normal! This wall only acts as a partition wall, usually closed like this! Otherwise, it's hard to fill the flat top! But the master's craft was indeed crude. The most important thing is that the mortar joints are not full, which will affect the integrity of the wall structure!

There are also netizens who give more professional messages:

1, there are problems everywhere, the gray seams are not full, there are blind cracks, the wall is uneven, the top brick is not used in the triangle block, and it is a one-time top, the top brick needs to be placed after 14 days after the completion of the wall masonry.

2, this is not a load-bearing wall is a filled wall. The masonry at the top of the infill wall had to be built in this way. This masonry is not for the above masonry mortar full, is to consider the above beam after the force, the beam presses the wall masonry, the force received is transmitted to the wall masonry, the wall masonry will be transmitted down, causing the following carrier to exceed the load on the design and deformation, resulting in adverse consequences.

The wall is built in this way, and the beam will not have a negative impact on the wall masonry after being forced.

This is a normative requirement, not a creation of construction workers. All the infill walls of the building had to be masonry in this way.

What are your thoughts on this?

Feel free to leave a message in the comments section.

#Ganzhou headline# #虎年有娱 #