There are many domestic car brands, and the focus of different brand development is also different, some car companies are famous for SUVs, such as the Great Wall, and some companies are famous for MPV models, such as Ruifeng. For most consumers, Ruifeng's car is very cost-effective, large space, cheap price, suitable for most people to buy as a family car. After having a user base, Ruifeng also began to build new energy models, and like most fuel companies, Ruifeng's new energy vehicles are also built on the basis of fuel vehicles.
Today's introduction is Ruifeng's first electric MPV model, which is the Ruifeng E3, which will be mass-produced this year. Of course, for consumers, E3 does not have too much design or equipment, its shape and fuel car is exactly the same, in addition to the power matching changes, the appearance and interior design are the same as the fuel car, the difference is that the appearance of the new car has added some iconic patterns, improving the recognition of the new car, let's take a look.
In terms of appearance, the new car is based on the M3, although it is an MPV model, but the size can only be regarded as a compact MPV. The front face is designed to be the same as the fuel model, the grille and the headlight group are integrated, the interior is a horizontal trim decoration, the bottom has a through-type mouth, and two large letters of EV are added to the hood, showing consumers its new energy identity.
From the side, this car body appears slender, like an extended version of the van, the charging port is located above the front hub, the door opening and closing method is push and pull design, convenient for customers to get on and off, the entire side shape is relatively single, there is a large area of white space, body size, the new car length and width are 5145/1765/1900mm, wheelbase 3110mm. The tail is the same as the fuel vehicle, the design has not changed, but the tail has an E3 font, which improves the recognition.
The interior part, compared with the fuel vehicle, there are only two small changes in the interior of the new energy vehicle, one is the dashboard display mode, the tachometer is changed to a power meter, after all, the electric vehicle has no engine; there is also a gear handle, the fuel car only has a manual transmission model, the gear handle design is also manual, and the new energy vehicle is changed to an automatic gear handle, and the sense of grade is higher. Other aspects of the design and fuel vehicles, three-spoke steering wheel, floating LCD screen, the bottom retains a lot of practical function buttons, the shape and the new force brand is very different.
In terms of power, this car is equipped with a lithium titanium phosphate battery with a capacity of 75.5kwh, with a power of 150ps, a torque of 295N·m, and a cruising range of 415km given by the official. Most of the purchase of this car is for family use, MPV models for commuting is a waste, then this car is rarely empty, the overall endurance should shrink somewhat, especially in winter, can run more than 300km is not bad.
In general, the MPV market has slowly become popular, the demand is also increasing, under the impact of the new energy market, many traditional companies are making changes, but this E3 gives people the feeling of a perfunctory work, the overall highlights are not much, the main practicality, coupled with the low price, aiming at the pure electric entry MPV market, but Brother Bean believes that the shape needs to be improved.