Compared to automatic cars, manual cars are much more difficult to handle. Especially for novice drivers, it is difficult to control the clutch, which often turns off the ignition during the drive. So when we usually drive a manual car, how to avoid the car from stalling? Today Xiaobian will teach you a few tricks.
First of all, we have to adjust our sitting position when we get on the bus, which is very important. When we were in the second and third sections, the coach also told us to adjust our sitting posture to make sure that we could see the rearview mirror and fully depress the clutch pedal. If the seat cushion is too high or the seat adjustment is too low, it will cause our left foot to not be able to step on the clutch pedal to the end, causing the car to stop.
Secondly, when we drive a manual transmission car, we must find the position of the contact point of the car clutch pedal. Only when we are familiar with the contact point position of the car clutch pedal can we accurately control the car clutch. When we find the position of the clutch pedal contact point, the next thing to pay attention to is the problem of the clutch and the throttle working with each other when starting. If the car does not cooperate well with the throttle and clutch at start-up, the car can easily turn off. Therefore, when we start, we must first step on the clutch, hang up 1 gear, and then slowly step on the accelerator while slowly stepping on the clutch, and then slowly release the clutch with the left foot when the car starts to move forward, so that the car can start smoothly.
In fact, the manual transmission car flat start is relatively simple, the difficult is the ramp start, many car owners often turn off when starting at the half slope. So how exactly should we start in Banpo to avoid the car from stalling? When we start at the half slope, we must first pull up the handbrake, then step on the clutch, hang up 1 gear, and then lightly step on the accelerator and release the handbrake when the car starts to shake, so that the car can start smoothly. If you can't control the throttle and clutch well, don't start on the half slope, if you are not careful, it will cause the car to slip, which is very dangerous.
After talking about how to avoid the problem of manual transmission car stalling, the next small editor will talk to you about the shifting skills of manual transmission cars. Manually shifting cars seems simple, but there are many tricks. First of all, the manual transmission car must be consistent in the movement of gears, many owners often do not have a foot in the clutch when changing gears, and the gear is not in place, which will aggravate the wear and tear of the gearbox. Therefore, everyone must be in place in one step when changing gears, if the gear is not in place, do not release the clutch.
Secondly, when changing gears, we must remember the principle of accelerating first in the gear shift, and it is very important to step on the clutch to the end before changing gears. In addition, we must grasp the timing of the shift when changing gears, do not jump gear directly, which will not only cause damage to the engine, but also cause us to be unable to control the speed of the car, which is very dangerous.
Well, today's relevant knowledge points about manual transmission cars are here, we must remember Oh.