In addition to the familiar CFMOTO Spring Wind and QJMOTOR Qianjiang preparing to enter the Moto3 arena, there has also been a shocking new car news overseas recently, that is, Benda Motorcycle is preparing to launch a 300-class turbo imitation VTR-300 TURBO.
In recent years, Benda this car factory has gradually exerted efforts in the large displacement market, and in 2021, it will launch the Tang Dao 700 V-four-cylinder street car that makes the eyes of many Chinese car fans shine, as well as the 700 American cruise street car, Andr's cars also take the American cruise style, and the small and medium-sized displacement parts have a Chinchilla 300, a graystone 300 and so on.
Benta's current models are mainly American cruise models
The VTR-300 exposed this time is a pseudo-racing car model prepared by Benta, from the computer modeling pictures, the VTR-300 has a rather bloody styling design, and the whole car can also see the steel pipe frame, the inverted fork, the mid-single gun rear suspension, and the suspected BREMBO four-radiation caliper and other good materials.
The patented model seems to be quite good for the VTR-300, including inverted forks, BREMBO calipers and so on
In terms of power, it is expected to use a 298c.c. V-twin engine, which has 30 maximum horsepower on the Chinchilla 300 American model, but Benda has posted a trailer for the VTR-300, and a line of TURBO is added at the bottom of the picture, which seems to suggest that the VTR-300 is likely to be equipped with a turbocharging system.
The VTR-300 is expected to use the 298c .c.V twin engine of the Chinchilla 300
There is also a line of TURBO under the trailer image, which seems to imply that the VTR-300 may be turbocharged
If Benda really adds turbocharging for the VTR-300, it will definitely set off a wave in the market, according to foreign media speculation, if the VTR-300 is really equipped with a turbine, it is very likely to increase the power to about 50 horsepower performance, with a displacement of 298c .c., this has been close to the HORSEpower level of the HONDA CBR500R.
Although the detailed specification data about the Benta VTR-300 has not yet been published, it seems that the design of the turbine structure does not appear on the drawing from the patent drawing, whether the TURBO word on the VTR-300 promotional map is just a gimmick, or is it really intended to be put into practice, let's continue to read it together!