In line with Xiaopeng and NIO, Ideal Auto also ushered in the NOA "Navigation Assisted Driving" system in the 3.0 OTA upgrade version.
The 3.0 OTA upgrade version is also the largest upgrade in the history of the ideal ONE car, adding many functions, and the ideal car official also sent a nanny-level instructions.
After the upgrade of the car, the ideal car APP can set the temperature in the cockpit in advance, set the functions such as seat heating and ventilation, and complete routine safety inspections (tire pressure, maintenance, etc.);
The 2021 Ideal ONE comes standard with an 8-megapixel camera, Horizon "Journey 3" autopilot chip, 5 millimeter-wave radars, 12 ultrasonic sensors and 4 surround-view cameras, which can cope with complex road conditions and ensure the safety of yourself and your family.
The effective viewing distance of the camera reaches 200 meters and the recognition angle reaches 120 degrees; the recognition range of millimeter-wave radar reaches 150 degrees per camera, and the detection distance exceeds 110 meters.
Before using the navigation assisted driving function for the first time, you need to carefully watch the in-machine function explanation video and pass the "LKA Lane Keeping Assist" and "Navigation Assisted Driving" answer tests in the ideal car APP.
During the driving process, when the vehicle enters the road section covered by the HIGH-definition map, it can turn on navigation assistance through the following two ways.
First, the driver dials back the lever twice. Second, the vehicle will automatically switch to navigation assisted driving when the LKA lane is kept on.
For safety reasons, if the occupants in the first and second rows are not wearing seat belts, the navigation assistance function will not be able to be turned on;
Release the seat belt in the middle of the journey, and the navigation assist driver will turn off the step-by-step prompt (30 seconds white light reminder, 30-60 second red light reminder, more than 60 seconds) and require the driver to take over the vehicle as soon as possible after receiving the reminder.
In the high-speed section supported by navigation assistance driving, after the function is turned on, the vehicle will enter the navigation assistance cruise stage, and complete the early lane change, up and down ramp and other actions according to the navigation path.
At the same time, it supports the identification of traffic speed, when the traffic flow in front of you is slow, it will automatically prompt you to overtake in the fast lane and line, and the vehicle will ask the driver whether to perform before performing the parallel action, and the driver can confirm it through the OK key on the right side of the steering wheel.
When Navigation Assisted Driving is turned on, the vehicle will automatically drive according to the current road speed limit, and when the speed limit changes, the speed will automatically adjust.
If you are about to pass through complex roads, construction sections, high curvature curves, plugged vehicles, etc., the vehicle will issue a reminder, and the driver needs to take over the vehicle if necessary.
In the event of an emergency, the FCW forward collision warning and AEB automatic emergency braking, the system will automatically start, when it is about to drive out of the high-precision map coverage section, the vehicle will remind the driver that it is about to exit the navigation assisted driving.