Casio AWG-M100 watch time and date settings.
1. Time and date setting. Key description: Press and hold the C button for about 4 seconds in any mode until the English abbreviation of the day of the week is displayed on the right screen, indicating that the timing mode has been returned. In the timekeeping mode, press and hold the A button for about 2 seconds until ADG appears on the right screen and then let go. At this time, the right LCD screen changes to the city code scroll, which can be adjusted by pressing D or B. China can be set to BJS or HKG.
Press the C button, the DSD indicator on the left screen flashes, the right screen AUTO or ON or OFF flashes, you can press the D button to switch, press D to twist OFF to indicate that daylight saving time is off; Press D again to twist, ON means daylight saving time is on; Press the D button AUTO again to indicate that daylight saving time is automatically set according to the selected time zone, Chinese mainland daylight saving time is not implemented yet, you can select OFF to turn off.
Press the C button again, the right screen 12H or 24H flashes, you can press the D button to switch, press the D button for 12H to indicate the 12-hour display time, and then press the D button for 24H to indicate the 24-hour display time, and then press the D button, the number of seconds below the screen flashes, you can press the D button to reset to zero. You can refer to standard time to synchronize the seconds to zero.
Press the C button again, the left screen hours flash, you can press the D button or B button to adjust; Press the C button again, the left screen flashes for minutes, you can press the D button or B button to adjust; Press the C button again, the year on the right screen flashes, you can press the D button or B button to adjust;
Press the C button again, the month of the left screen flashes, you can press the D button or B button to adjust; Press the C button again, the right screen KEY or MUTE flashes, at this time you can set the button operation tone switch, you can press the D button to switch; Press the D button once, KEY means the operation tone is on, press the D button again, MUTE means the operation tone is off. Press the D button again, and the right screen displays LT1 or LT3, at which point you can set the lighting duration. It can be toggled by D in the lower right corner. Press the D button LT3 for 1.5 seconds, and press the D button LT3 for 3 seconds. After pressing the C button, the right screen shows PSON or PSOF flashing, and the power-saving function switch can be set. It can be switched by D, and pressing the D button PSOFF indicates that the power-saving function is turned on. Press the D button PSOFF to turn off the power saving function. After all adjustments, press A button to return to the timekeeping mode.
The above is the AWG-M100 operation demonstration, thank you for watching! Correction of the pointer reference position. AWG-M100/calibre 5230 universal. 2. Correction key description of pointer reference position. Press and hold the button for about 4 seconds in any mode until the English abbreviation of the week is displayed on the right screen, indicating that the timekeeping mode has been returned. If the hands in the chronograph mode are inconsistent with the time displayed on the LCD screen, you need to adjust the reference position, as follows.
Press and hold the A button for about 5 seconds in the timekeeping mode until H-SET appears on the right screen, indicating that the reference position adjustment mode has been entered. At this time, the hour and minute hands should automatically move to the 12 o'clock position, if they do not point to 12 o'clock, they can be adjusted by D or B button, press D button to go forward, press B button to go backwards. Press and hold D button or B button to move forward or backward at high speed. If the hand is still turning, press B or B to stop.
After adjustment, press the A button to return to the timekeeping mode.
The above is the operation demonstration of AWG bar M100, thank you for watching! 3. Manually receive radio signals. Key instructions, confirm that the environment is not occluded, and there is no signal interference, and the watch is placed horizontally for 12 times facing the window direction. Press and hold the C button for about 4 seconds in any mode until the English abbreviation of the day of the week is displayed on the right screen, indicating that the timekeeping mode has been returned.
Press and hold the D button in the timekeeping mode until an RC exclamation mark appears on the right screen, indicating that you have entered the manual receiving radio signal mode. The lower screen indicates the signal strength, if it is blank, it means that the signal is weak, L1 means that the signal is weak, L2 means that the signal is average, and L3 means that the signal is strong. Please note that the signal reception takes 3-8 minutes, the longest may take about 16 minutes, do not move the watch or do any button operation. After the reception is completed, the right screen will change to GET or ERF, GET means successful reception, ERR means receipt failure. If the reception is successful, the LCD on the left will display the time and date of the reception, and the watch will automatically return to the chronograph status after about 1 to 2 minutes regardless of whether the reception is successful or not.
The above is the operation demonstration of AWGM100, thank you for watching!
