The new Mercedes-Benz A-class hatchback version of the domestic spy photo was exposed
Hello hello everyone I am Geek Maple Cloud, a group of new Mercedes-Benz A-class hatchback version of the domestic test spy photos exposed, it can be seen that the new car as a whole will still use the family design language to create, the front grille interior is expected to use flying wing design, the sharp shape of the headlamp group will not be absent.
At the same time, the new car may be equipped with a wider size vent at the front surround, which can optimize the aerodynamic performance of the vehicle. The side is different from the domestic sedan version previously tested, the hatchback version is equipped with a more aggressive sports rim, and the hatchback body design also makes it look more compact.
The rear light group and rear surround of the car are still covered with camouflage, and no details can be seen for the time being. In terms of power, the new car is expected to follow the power configuration of the old model. Combined with the previous news, the new Mercedes-AMG A-Class model will meet us after the debut of the new Mercedes-Benz A-Class. Those interested in the car can pay attention to it.
BMW M3 CSL road test spy photos exposed
Overseas media obtained a set of road test spy photos of suspected BMW M3 CSL models. Although at present BMW officials have not recognized the existence of the M3 CSL model. But the front part of the M3 test car is covered with camouflage, its appearance is basically the same as the previous M4 CSL model, and the test car also uses a yellow LED daily running light group, which is also a configuration that will appear on the performance version of BMW's M division at the highest specifications.
On the side, it is not much different from the current M3, but it can be clearly seen that the brakes of the new car use a carbon ceramic system, and the horn exterior mirrors are also camouflaged, and it is expected to use a forged carbon fiber pattern. In addition, the rear window glass is also covered with camouflage stickers, and it is not known what the official will add to the rear of this vehicle. It is speculated that in order to reduce weight, it can be replaced by lightweight barrel seats similar to the rear of the BMW M5 CS.
Or simply eliminate the rear seats and install the original in-car roll cage. The rear of the car is still equipped with a small size rear spoiler, and the rear surround is equipped with a large size rear diffuser, and a large-diameter exhaust layout with a total of four sides is adopted.
In terms of power, the new car will still be equipped with a 3.0T twin-turbo inline six-cylinder engine, but it is said that the maximum power of the engine will be increased to 540 horsepower, and the transmission system will still match the 8-speed manual transmission and four-wheel drive system. It is reported that the new car or will be unveiled in 2022. I look forward to the official to bring us more news.
The new GAC Trumpchi GS3 POWER is officially launched
The new Trumpchi GS3 POWER announced its official launch as an annual redesign model with adjusted exterior details. The front face still adopts the family-style "Lingyun Wing 3.0" design style, the headlights and the grille are well integrated, and the yellow trim above the grille is one of the highlights of this redesign.
In addition, the design of the fog light area below with the strip throughout is still the finishing touch of the entire front face. On the side, you can see that the wheel rim and fenders of the new car are decorated with yellow, and the gray body of the haoyue moon forms a contrasting design. The rear of the car still retains the ducktail on the trunk + the spoiler design above the roof. In addition, the new car has been adjusted for the rear logo, the "Trumpchi" English logo has been removed, and the "POWER" logo has been added to the lower right. In terms of body dimensions, the new car remained unchanged, with a length, width and height of 4350/1825/1660 (1685 including luggage rack) mm, and a wheelbase of 2560 mm.
The interior of the car has also been upgraded for the color scheme, using a black and yellow color scheme. In addition, the new car still retains the dual screen design, of which the 10.25-inch central control screen is still the standard of the whole series. In terms of power, the new car is still equipped with a 1.5T engine and provides low/high power tuning, the low-power version has a maximum power of 163 horsepower and a peak torque of 235 Nm, which is matched by a 6-speed manual transmission. The high-power version has a maximum power of 169 hp and a peak torque of 265 Nm, which is matched by a 6-speed automatic transmission.
A total of four models were launched, with prices ranging from 84,800 to 102,800 yuan. Will you choose the car?
The new Hyundai Paristi teaser is released
Hyundai officially released the new Paristi teaser, through the trailer, the grille of the new car has been equipped with a new family design style, but compared with the previous models (such as Tucson L), the new Paristiger grid grid line is more rigid, rectangular-oriented, making its front face more atmospheric and stable.
In addition, it can also be seen that the new car has a vertical daytime running light design, and the headlights or design are next to the "L" type daytime running lights. Another side trailer shows us the front side of the car, the new car will still be equipped with large rims, and the design of multiple spokes adds a sense of luxury. The interior and power of the new car have not been officially announced for the time being, and it is not expected that there will be much change.
It is reported that the new car will be officially released at the New York Auto Show that opens on April 13. The specific information is still subject to the official release, pay attention to it.
The official diagram of the Great Saint Tail Department of Jietu was released
Jietu Automobile released the official picture of the tail of its Jietu Dasheng model. The new car is built based on the "Kunlun" architecture, positioned as a compact SUV, and integrated into the mecha design style in terms of tail design.
It can be seen that the roof spoiler is equipped with a skeleton air duct design, the middle is also equipped with high brake lights, the tail lights on both sides adopt an irregular shape, and its internal light group is very recognizable after lighting. The rear of the car is more sci-fi, and the exhaust layout of the two sides is designed to resemble the fighter air intake, plus a large double-layer diffuser decoration.
Looking back at the front of the car, the bezel-less front grille with split headlights also has a strong mech style. In terms of power, the new car will provide two power options, the fuel version and the hybrid version, of which the fuel version will be equipped with two engines of 1.5TCI and 1.6TD, and the hybrid version will be equipped with a plug-in hybrid power system of 1.5T-DHT. It is reported that the new car will be listed in the third quarter of 2022. Do you like these designs?