laitimes

BYD "Han DM-i" real hammer! Build a 1.5T plug-in and mixing system, and pre-sale is expected to start at the end of February

BYD "Han DM-i" real hammer! Build a 1.5T plug-in and mixing system, and pre-sale is expected to start at the end of February

Xiaobian recently learned from the front that BYD's new generation of "Han DM-i" has been hammered, according to the information, the new car will officially enter the pre-sale stage in late February, and the new car will be fully listed in early April, the new car will continue the classic design of Tang DM, not only in the present, even if it is placed in a few years, this design will not be outdated. The new car will be equipped with a 1.5T plug-in hybrid system, divided into two-wheel drive and four-wheel drive two versions, let's see what changes the new car has brought us in the details!

BYD "Han DM-i" real hammer! Build a 1.5T plug-in and mixing system, and pre-sale is expected to start at the end of February

First of all, in terms of appearance, the new car continues the design language of "Longyan". The entire grille has obviously sunk, and the internal composition has been replaced by this blocky lattice shape, with a rounded hexagonal shape, bringing better visual effects. The words "Han" are still printed on the top of the grille to indicate their identity! Overall it feels more aggressive than DM!

BYD "Han DM-i" real hammer! Build a 1.5T plug-in and mixing system, and pre-sale is expected to start at the end of February

On the entire side, the new car also has its own characteristics, such as the waistline of the new car adopts a half-segment design, extending from the front to the rear, bringing a strong sense of sharpness! The new car is still positioned in large and medium-sized cars, so the advantages in size are also very obvious. Dm-i has a length, width and height of 4960mm/1910mm/1495mm, respectively, and a wheelbase of 2920mm. The red brake calipers equipped with it bring a strong sporty atmosphere. The rear of the car, at first glance, is consistent with the EV version of the model design, using the design concept of "front circle rear", the addition of more horizontal lines makes the new car look more wide, and the tail lights also add more Chinese elements, such as the shape of the tail lights and the shape of the "dragon claw". The multi-layered rear surround also gives the car the finishing touch.

BYD "Han DM-i" real hammer! Build a 1.5T plug-in and mixing system, and pre-sale is expected to start at the end of February

At present, the interior of this Han DM-i has not been exposed, but there is basically no difference with his Tang DM version, of course, in the end, it is still subject to the listing, the above picture is the interior style of BYD Tang DM! Friends can refer to it by themselves!

BYD "Han DM-i" real hammer! Build a 1.5T plug-in and mixing system, and pre-sale is expected to start at the end of February

The picture above is the adjustment of dm-i details, we see that the entire optional accessories are still very rich, including wheels, trims, and combination headlights can be optional! Let the small editor is the new car brake calipers can also be optional, from the picture can be seen can be selected red and green two colors! So the new car is more like a private custom feeling!

In terms of power, the new car is equipped with a plug-in hybrid system consisting of a 1.5T engine, an electric motor and a lithium iron phosphate blade battery. Among them, the maximum power of the gasoline engine is 102kW, and the peak torque reaches 231N·m; while the maximum power of the motor is 145kW, and the peak torque is 325N·m. The new car is expected to enter the pre-sale in late February!

Read on