You may not have seen a single piece of hardware tools invented by Chinese cattlemen.
10th place: Hang the shade net to wear. The wire tightener is tied to one end, and the other end is threaded into the middle shaft of the wire tightener, twisting the shaft, and the more it turns, the tighter it gets. And it is also an anti-theft push design, so that the tightened wire is tight and straight.
9th place: Compression fixed bundle of rear transport object. Never worry about the rope falling off again. Strapping fasteners can be used, and the binding is also very simple, with thickened hooks at the double end for more convenient use. The strapping belt adopts the principle of lever, the tightening effect is good, it is not easy to loosen, and it can be easily opened by holding down the buckle, and it is also very convenient to use.
Eighth place: This is a wire binding artifact that a farmer master researched and invented by himself. Don't look at the small tools, it is very convenient to use, which solves the trouble of farmers building greenhouses and tying steel wire. Whether it is square wood wire fixation, hose wire fixation, water pipe wire fixation, bamboo pole wire fixation, power magnetic column wire fixation or cement square column wire fixation. Using this wire binding artifact to bind is much simpler and more trouble-free, not only convenient and trouble-saving, but also firmly and beautifully bound.
Seventh place: automatic steel binding machine. It only takes 0.8 seconds to complete the binding. When used with one hand, just press the switch and the inner wire coil will be pushed out, instantly knotted. The built-in smart chip can also automatically adjust according to the thickness of the steel bar, which greatly improves work efficiency.
Sixth place: This is a new multi-functional multi-angle table arc caliper. Its jaw blessing is very large, usually you can use it to bless various parts, in the cutting and punching without adjusting the angle of the object, directly on the vice can be adjusted, very convenient and trouble-free.
Fifth place: Engage in maintenance. Often encounter rusty and stubborn screws are not easy to take, first use a cutter to cut the wings, and then use this set of impact screwdrivers. Let's take a look at its working principle, as long as you press down, it will automatically rotate, align with the rusty screw, gently tap the screw with a hammer to loosen, and then screw it out.
Fourth place: If you like to do handicrafts, you must take a look. This small engraving machine can be adjusted without starting, can be blessed with 0.5 to 3.2 mm drill bits, can punch wood, plastic, pearl holes, jade carving, polishing, with cutting sheets, can also cut, the price is not expensive.
3rd place: This is Lulin's power tool set screwdriver, sleeve small electric drill and 65 shawls, this set easily meets the needs of daily life. Whether it's changing the lock cylinder or changing the battery of your phone, it's all a problem. It is also very convenient to use it to charge when repairing electrical appliances at home, and the mainstream charging interface.
2nd place: light strip switch. There are always a variety of sizes, and drills don't fit perfectly. This is a set of pagoda drills that can be opened from four millimeters to thirty-two millimeters, and can address openings of various sizes. There are also two drills that can run sideways, and it is convenient to reamer and pull holes.
First place: Customized installation of the whole house later. Use this three-in-one linkage installation special sleeve, use it to install not only fast, not slippery, the most important thing is that it will not poke the hand, which is efficient and safe, and can easily earn tens of thousands more a year.
