laitimes

The iPhone 14 series camera module is likely to be more prominent due to the impact of pixel upgrades

At present, the news about the iPhone 14 series mobile phone on the Internet can be said to be full of flying, but a lot of information has been hammered, such as the iPhone 14 series camera, it is reported that Apple will upgrade the iPhone 14 series camera from 1200W pixels to 4800W pixels this year, I have to say that this wave of upgrades is indeed quite large, Apple's shooting strength is not bad, this time to upgrade the ancestral lens pixels, I am afraid that it is going to return to the peak.

According to the latest news from foreign media, based on the new 3D printing model of Apple's iPhone 14 series that will be released this fall, it has brought relatively accurate dimensions, and more accurate results have been obtained by carefully observing the design changes of Apple's 2022 iPhone lineup, especially compared with the current iPhone 13 series.

The iPhone 14 series camera module is likely to be more prominent due to the impact of pixel upgrades

According to previous rumors and schematic diagrams, the iPhone 14 series will be equipped with a larger camera system on the back, and from the images shared by foreign media today, by trying to put the physical model of the iPhone 14 series into the iPhone 13 series shell and see if they match, thus showing the design change more clearly.

The 6.7-inch iPhone 14 Max shown in the image below fits almost perfectly into the case of the 6.7-inch iPhone 13 Pro Max, suggesting that the physical dimensions of the two devices are essentially the same. The simpler dual-lens camera system on non-Pro models is smaller than the three-lens Pro camera system, so the camera bulge on the new non-Pro version of the iPhone 14 Max will be significantly smaller than Apple's current 6.7-inch iPhone 13 Pro Max.

The iPhone 14 series camera module is likely to be more prominent due to the impact of pixel upgrades

For more of its kind, the smaller 6.1-inch iPhone 14 and iPhone 14 Pro models don't fit into the corresponding iPhone 13 and iPhone 13 Pro cases. Image display, especially the bulging camera can cause fit problems, because it is significantly larger on the iPhone 14 and iPhone 14 Pro, and the overall device size is slightly larger, so the phone cannot even be tucked into the case.

Read on