Dahe News Yu video reporter Qi Yi
General traffic accidents occur in the forward direction of the car, from the proportion of accidents, the proportion of accidents caused by reversing is low, and the proportion of fatal accidents caused by reversing is lower. However, there are many vehicle collisions and scraping accidents caused by reversing.
When each car owner travels by car, it is inseparable from the reversing operation link, and from the perspective of safety and care for the vehicle, attention should be paid to the problem of reversing.
At the beginning, when learning to practice "drill pipe", each student also felt that it was easy to move forward and difficult to reverse, mainly caused by the rear blind spot, the "pinching" was not accurate, reverse control, posture deformation and other reasons.
The reversing environment during actual driving is much more complicated than that of the "drill pipe", such as the limit of the surrounding space, the height of obstacles, the visual difference between day and night, and the change of traffic dynamic environment. As a result, many car owners have almost no accidents driving head-on. However, due to the collision and scraping caused by reversing, the vehicle damage has occurred repeatedly.
So what points should we pay attention to when reversing?
1
Blind reversing behind the car when the situation is unclear should be strictly prohibited. The harm of blind reversing is extremely great, light vehicle damage, heavy personal injury, such a case is many.
2
Avoid reversing at night in environments such as unfamiliar terrain, narrow surrounding space, and poor lighting. Poor lighting at night, unclear vision, inaccurate grasp of the surrounding space scale, etc., will increase the difficulty of reversing, especially the difficulty of filmed vehicles. You should try to choose a well-lit, spacious and flat place to reverse. The reversing distance should not be too long, and it is best to avoid or reduce night reversing.
3
Stay on the lookout for changes in your dynamic environment. If there is no obstacle after getting on the car, but your situation has changed during the process of getting on the car and starting, there are "activity obstacles" behind the car, such as pedestrians, and the obstacle is in the rear blind area, and the situation cannot be found in time and causes an accident. In the case of complex and changeable traffic environment, we should pay more attention to dynamic environmental changes.
4
Pay attention to the front and back care. When you reverse in the parking space, such a thing may happen, due to the narrow space around, reversing and turning, only paying attention to the rear of the car and ignoring the head of the car, resulting in scratching on the side of the front of the car. This is due to the fact that during the steering process of the car, the turning radius of the steering wheel is greater than the turning radius of the rear wheel. Then when reversing, the head of the car should be thrown outward, resulting in a scraping on the side of the head of the vehicle.
Therefore, when reversing, we must look forward and backward, and take care of the front and back. The situation encountered when reversing is complex and changeable, and there are more problems that should be paid attention to, and novice drivers should sum up their experience. It is easy to go forward and difficult to backward, and it is dangerous to blindly reverse. Find out the situation and then reverse, personal vehicle safety.
How to reverse safely:
If you plan to reverse, then before getting on the car, you should go around the car for a week, in addition to checking the condition of the car, it is to see if there are obstacles hiding in the blind area. No matter how big the rearview mirrors are, no matter how many reversing radars there are, and no matter how wide the reversing image range is, it is safe to observe it yourself. The correct approach is to raise the sitting position so that you can see the front edge of the bonnet, and the backrest is at a reasonable angle, not too oblique, but also not too straight.
After the seat is adjusted, adjust the mirrors. In addition, when observing through the rearview mirror and reversing, do not turn back, it is easier to take into account the dynamics of the front of the car, and it is not easy to rub the obstacle on the front of the car.
Lighting the headlights or brake lights is helpful in judging the distance from the obstacle, and usually the smaller the light spot left on the illuminated object, the closer the vehicle is to the obstacle.
Parking in the same direction as the vehicle next to it reduces the chance of the vehicle being damaged. If the place is cramped, there are obstacles on both sides of the car (such as parked cars), when you fall to the left, as far as possible to let the body stick to the left, and vice versa, so that you can turn in advance and shorten the reversing distance.
5
Remember to be slow when reversing to prevent unexpected situations. At the same time, do not hit the wheel in situ, so that not only the car is damaged, but also the directional assistance at this time becomes very heavy.
After reading these, we all know the safety hazards of reversing, the blind spot is really terrible, so whether it is a pedestrian or a car owner must observe the surrounding area when reversing, the owner is cautious about reversing, pedestrians pay attention to safety, especially the old people with children, the accident can be regretted!
Source: Dahe Newspaper Yu Video Editor: Jie Minggang