For novice drivers, complex and tortuous corners are a test of driving skills. If the angle and speed are not well controlled, the vehicle is prone to rollover, especially in compound corners and blind corners. Today Xiaobian will tell you some tips for driving through the corners, so that you can quickly and safely pass the corners, and novice drivers who are afraid of turning must take a good look at it.
First of all, let's talk about the turning skills of the flat road curve, we must slow down in advance before entering the corner, so as not to cause the vehicle to roll over because the speed is too fast. Secondly, we must learn to control the steering wheel when turning, and try to use large arcs to turn. In addition to controlling the speed and turning angle when turning in a flat road corner, we must also pay attention to avoiding the use of brakes as much as possible. If we use brakes in curves, it is easy to cause skidding or even overturning. In addition, we also have to pay special attention to the blind corners of the bend, if one is not careful, it is easy to press the road cornerstone or scratch.
If the curve we pass through is a compound curve, that is, a curve composed of more than two curves. We first reduce the speed, then honk the horn to prompt other vehicles, drive slowly through the first corner after ensuring safety, and then slightly increase the throttle to leave the corner when we see the exit of the last corner.
If the curve we are passing is a blind spot bend, we must not drive in a normal way, because the blind zone corner cannot see the traffic at the end of the corner. We must reduce the speed before entering the blind corner, and we must honk the horn in advance to show our presence. When we pass the left corner, we have to drive along the outside of the curve, and when we pass the right corner, we have to drive along the inside of the curve, which stems from the skill of turning left and turning big and right and making small turns.
In addition, when we turn in blind corners, we must also pay attention to the rearview mirror at all times. Rearview mirrors play a very important role in our daily driving, and if we can make good use of the rearview mirrors when turning in blind corners, it will greatly improve the safety of driving.
After talking about the skills of driving through the corners, let's talk about the skills of driving lanes. First of all, when we change lanes, we must learn to judge whether there are conditions for lane change by looking at the rearview mirror. If the rear car occupies one-third of the rearview mirror, it means that we maintain a relatively safe distance from the rear car, and we can change lanes. If the rearview mirror cannot see the entire car behind us, this means that the rear car is relatively close to us, which is not suitable for lane change.
When we determine that we can change lanes, we must turn on the turn signals in advance, and then quickly complete the lane changes, without dragging. If the lane change is too slow, it is easy to collide with other vehicles. Some car owners are hesitant to change lanes, so they will lead to traffic accidents.
Well, today's related skills about driving through corners and driving lane changes are here, have you learned?