Dahe News Yu video reporter Qi Yi
We all know that the driving habits of the owner of the car, to a large extent affect the safety of the vehicle and the final service life, do not look at most of the nuances in the driving operation, but small adverse effects will accumulate over time, and eventually lead to qualitative changes, in a certain moment to break out of the bad will cause very serious consequences.
It is said that stepping on the brakes while driving through the speed bump is a car-destroying operation, why is this? Especially these 3 places are very damaging! After reading it, I suddenly realized!
Suspension damage
The so-called suspension system is actually a car shock absorber, which has a great impact on the car owner and the ride experience of the passenger. And the vibration sensation when the speed reduction belt is pressed on the brake will be directly absorbed, so when faced for a long time, the performance of the suspension system will be greatly reduced, and even directly damaged!
The electronic equipment in the car was damaged
Because the speed of the car is very fast, even if you step on the brakes, it will still bounce up a distance on the speed reduction belt, so the vibration of the car will indeed be relatively large, and the electronic equipment will also shake or shake, if it is the audio in the car, there will be poor sound quality or even vibrato, so these vibrations are likely to cause the electronic parts of the car to loosen and fall off.
Deposited dust floats in the car, affecting human health
After a long period of use, the car will inevitably appear some dust, and this dust is not as difficult to clean as everyone thinks, and the vibration will also cause these dust to float in the car, affecting everyone's health!
What is the right thing to do?
Because the suspension of the car will be seriously fluctuated, when passing through the ground with poor road conditions, the suspension can play a role in buffering and filtering vibrations, which can ensure the comfort of passengers, but everyone ignores the height of the suspension when passing the speed bump.
The correct approach is to slow down before crossing the speed bump, which will reduce the damage to the car. When passing the speed reduction belt, do not brake sharply, but take the way of point braking to slowly reduce the speed of the vehicle.
In this way, we can pass the speed bump more gently and without causing greater damage to the chassis of the car.
Try to let the two front wheels pass together to avoid uneven force on both sides. And the sudden deceleration through is the biggest impact on the car, this should be very important, in most cases, the vertical passage is easy to support the bottom, because the speed is too fast, resulting in the suspension contraction after the downward rebound amplitude is larger and "bumped" to the chassis, slow down the speed can be avoided.
It turned out to be so... Have you learned?
Source: Dahe Newspaper Yu Video Editor: Jie Minggang