If you want to be warm in winter and cool in summer, you will think of installing central air conditioning in the whole house, but often when you are renovated, you will be dissuaded by these 3 reasons!
Reason 1: Central air conditioning in the whole house is expensive.
Reason 2: The whole house central air conditioning maintenance, replacement is difficult, is a big project.
Reason 3: Installation is laborious, adding difficulty to the ceiling.
In fact, the reason 1 and 2 has not become a problem, the central air conditioning is indeed more expensive, but the budget can be installed completely, afraid of maintenance problems, in the installation of the time to reserve a good maintenance port, but the central air conditioning comes with a large pipe machine equipment, need to be fixed on the top surface of the functional area, if you encounter a special-shaped ceiling top surface, how to install a real problem!
For example, the top duplex loft space, the top floor of the villa and the transformation of the special-shaped mezzanine, etc., the roof of the house in these cases is all special-shaped, the ceiling is a headache, and then install the central air conditioning, and do not know how to start it?
In fact, for the top surface of the special-shaped ceiling, these two ways can be considered to install central air conditioning, so as to achieve the hiding of the pipe machine.
Method 1: Partial ceiling hidden installation of central air conditioning.
The most common special-shaped ceiling is the sloped roof, at this time you can use a plurality of slopes to start to do the ceiling, the most common is to use gypsum board to do, before the ceiling needs to install and fix the air conditioning pipe machine, and then install the gypsum board, the pipe machine is completely hidden, but do not forget to reserve the air outlet, maintenance port, etc., otherwise it is also installed in vain!
Method two: do flat top or shape suspended ceiling hidden installation of central air conditioning.
It is an established fact that an alien ceiling can form a double slope or multiple slopes, so it is possible to transform the alien ceiling into a common flat roof.
Choosing a light steel keel + plasterboard can be achieved, so that from the façade of the house it is an alien roof, but what is seen indoors is a flat roof without an alien shape, like this:
Or you can choose to do multi-layer modeling ceilings, but the cost will only be higher.
The two methods of the second way can also achieve the special-shaped ceiling to install central air conditioning, but the renovation project is relatively large, and it will also lose more of the floor height of the original functional area, and for the floor height lower than the standard floor height, the second type is not recommended. For apartments with large space and high floors, it is OK to shape the ceiling or transform it into a flat roof.
Even if your home is a special-shaped ceiling, you don't have to worry about how to install central air conditioning, refer to the above. However, after all, it is the central air conditioning, the air outlet position is very important, there can be no obstruction, decorative lines and light strips are best to avoid the air outlet position.
(Part of the image is from the Internet)