The whole house custom installation acceptance and pit avoidance, even if the first time to do a custom cabinet will not step on the pit!
Ouzhi custom home.
I dare say that 60% of people who do custom at home have stepped on the pit and appear in the installation stage. Today Xiao Ou took you to the scene, even if you are Xiaobai after watching this video, you will understand. The whole house is customized to be delivered to the site, after the installation accident is unpacked.
The first step is to check the thickness and material of the plate, the material can be viewed from the groove and the hinge hole position, otherwise the material can not be seen when the installation is over.
Step 2: Check whether the color and model of the plate match the color when the order is placed. It is necessary to compare the colors of a board head on the spot in advance, especially white, because white colors are more varied.
The third step is that the installation master must use a level to hit the horizontal and vertical when installing. If the master does not hit the level, I strongly recommend the direct substitution.
Step 4: Check whether all hardware brands are different from the contract when installing. One thing that must be noted is that doors about two meters long must be equipped with 4 hinges, and doors about one meter and five meters long must be equipped with 3 hinges.
The fifth step, after the installation of the cabinet body, check whether the cabinet structure and size match the final drawing.
Step 6: Check whether all the edges are open. If the budget is enough, the cabinet door is recommended to use PUR or laser edge banding, and the traditional EVA should not be used.
Step 7: At the end of installation, be sure to check whether the flatness of the cabinet door and the size of the door seam are uniform, whether the drawer and cabinet door are opened normally, check whether there are scratches, and whether the closing glue at the junction with the wall is smooth and smooth.
Step 8: After the decoration is completed, complete the land reclamation and cleaning, tear off the protective film, and check whether there are bumps and scratches inside and outside. If there is a bump, contact the manufacturer to do after-sales.
