The whole house customized edge banding is the processing process of closing the cutting surface of the board, and it is also the most important process in the production process of the whole house custom furniture, but it is often ignored by people and the poor materials and processes are selected, resulting in the short service life of the edge banding of the board, cracking and falling off. Below we analyze the characteristics of different materials and different processes of edge banding, and I believe you will know how to choose after reading it.
1. Edge banding material: PVC edge banding, ABS edge banding, solid wood edge banding, aluminum alloy edge banding
1. PVC edge banding: polyvinyl chloride is the main material, and the appearance has wood grain, marble texture, etc.
(1) Advantages: bright and smooth appearance, strong sense of reality, cheap price;
(2) Disadvantages: poor quality stability, easy aging and discoloration.
2. ABS edge banding: acrylonitrile, butadiene, styrene terpolymer as the main raw material, with little additives added during manufacturing, it is one of the most advanced materials on the market.
(1) Advantages: green environmental protection, recyclable, strong stability, long service life;
(2) Disadvantages: The price of the product is higher, and the price is twice as high as that of PVC edge banding.
3. Solid wood edge banding: take solid wood veneer as the main material, and paste non-woven fabric on its back to increase the strength of the veneer.
(1) Advantages: made of natural wood veneer, the texture and texture are natural and real, can be harmonious with the board surface, and the types and styles are diverse;
(2) Disadvantages: poor moisture resistance, easy to get damp, high production cost.
4. Aluminum alloy edge banding: using aluminum alloy metal as raw material, it has the luster and texture of metal.
(1) Advantages: sturdy and durable, no deformation, weather resistance;
(2) Disadvantages: It is difficult to match the metal texture with the plate, it is difficult to integrate, and it lacks beauty.
2. Edge banding process: EVA edge banding, PUR edge banding, laser edge banding, diamond laser edge banding
1. EVA edge banding: The full name of EVA is ethylene acetate polymer hot melt adhesive, which is a solid glue. It is melted into a liquid adhesive at high temperature, applied to the substrate and edge banding surface, bonded, cooled, and formed.
(1) Advantages: cheap price and wide range of use;
(2) Disadvantages: large amount of glue used in the process of turning solid into liquid, poor environmental protection, easy to overflow glue, obvious glue line, especially light-colored plates, affected by temperature, easy to crack.
2. PUR edge banding: PUR is the full name of moisture curing reactive polyurethane hot melt adhesive, which is a liquid glue. After high-temperature heating, it undergoes irreversible reaction with moisture in the air and then solidifies and molds, and the plate will not melt after bonding with the edge banding strip after secondary heating.
(1) Advantages: relatively small amount of glue, high environmental protection, strong stability, good waterproof and moisture-proof performance;
(2) Disadvantages: higher price than others.
3. Laser edge banding: After the edge banding strip with a special photosensitive polymer functional layer is heated and activated by the laser edge banding machine, the polymer of the edge banding strip penetrates the plate under the pressure of the pressure roller to form high adhesion and seamlessly bond with the plate.
(1) Advantages: glue-free environmental protection, stable quality, long service life, round and smooth edges, smooth and smooth;
(2) Disadvantages: The price of laser edge banding machine is high and the processing cost is high.
4. Diamond laser edge banding: On the basis of laser edge banding, each side of the plate is inverted at a 45° bevel angle, and the plate becomes more three-dimensional, similar to diamonds.
(1) Advantages: glue-free environmental protection, stable quality, long service life, round and smooth edges, smooth and smooth;
(2) Disadvantages: Expensive.
Summary: In the above content, we have analyzed the material of the edge banding strip and the process of edge banding. When customizing the whole house, don't choose PVC edge banding, try to choose ABS edge banding, as for the edge banding process, we can choose the PUR edge banding process, if the budget allows, you can choose the laser edge banding process. I hope it will help you and avoid the pit of spending high prices and buying low quality.
Share home design and deliver a better life.
Some of the pictures are from the Internet, if there is any infringement, please contact to delete.
#万能生活指南#