The Pro H610T D4-CSM is a product that supports the Intel Alder Lake platform and features the H610 chipset, dual SO-DIMM slots, LGA1700 slots, and is powered by an external 19V DC through a round hole on the I/O panel. It supports 12th generation Core, Pentium and Celeron processors, TDP models of no more than 65W, and the choice is not small.
Although the chipset is positioned at the low end, the Pro H610T D4-CSM provides a direct-to-CPU PCIe 4.0 M.2 SSD slot that can be connected to two external SATA 6Gbps hard drives, while the SO-DIMM slot supports DDR4 memory, the display output interface has a DP and an HDMI, both supporting 4K@60Hz outputs, and is equipped with a 7.1-channel Realtek integrated sound card, plus a Gigabit Realtek network card interface. Two USB 3.2 Gen2 and two USB 2.0 interfaces, and an additional front USB interface is reserved, which can be expanded up to seven USB interfaces, etc.
Unlike many ITX motherboard models with chipset + "I" suffix, the use of "T" is due to its use of the thin Mini-ITX specification. Although the same 17 x17 cm specification as the mini-ITX, it is lower in height and is designed for building a compact mini PC or all-in-one, which also means that there will be more restrictions on the choice of CPU heatsink. However, due to the increase in the energy consumption ratio of Alder Lake, the overall heat generation is lower, compared with the past LGA 1200 platform, it is obvious that the LGA 1700 platform is more suitable for building this type of system.