When we usually drive, we inevitably pass through narrower paths. For novice drivers with less driving experience, it is difficult to safely pass through these narrow paths. Especially in the case of two cars, it is more difficult. So when we drive through the narrow road, how to pass safely, today Xiaobian will come to give you a good talk.
When we drive through a narrower road, if one is not careful, it is likely to rub the car, and may even turn into the ditch. Therefore, when we encounter narrow roads when driving, it is important to learn to judge the width of the road surface, which is the key to whether we can safely pass through the narrow road. If the width of the narrow road we encounter is two meters and our body width is 1600mm, it means that our car can completely pass this narrow road.
After judging the width of the road, the next thing to do is to carefully pass through the narrow road. Before driving into the narrow lane, you must try to straighten the body as much as possible. If the body is not correct, the vehicle will pass obliquely through the narrow road, so that the vehicle is more likely to scratch.
When driving through the narrow road, in addition to paying attention to whether the body is straight, we must also pay attention to the difference between the front and rear wheels of the car. Don't think that if the front wheel of the car passes the obstacle, it can recklessly hit the steering wheel and turn. If you hit the steering wheel turn at this time, the car is likely to scratch, so be sure to make sure that the rear wheel passes the narrow road before hitting the steering wheel turn. In addition, when driving on a narrow road, you must slow down and slow down, and always observe the surrounding road conditions to avoid suddenly hitting obstacles. The most important thing is to maintain a certain safe distance from the car in front, so as to avoid the sudden braking of the car in front of it, and it is too late to react and collide with the car in front.
We usually have to be careful when driving, in addition to passing through narrow roads, we should be more careful when passing through mountain roads. Mountain roads are more dangerous than narrow roads, and one who is not careful is likely to fall off a cliff. So what do we do when we drive through winding mountain roads?
First of all, when we are driving uphill, it is better to use the low gear. Because the lower the gear, the greater the torque output of the drive wheels, the greater the traction that the car can get and the easier it is to go uphill. When we drive downhill, never continuously slam on the brakes to control the speed. Continuous braking when going downhill will not only cause the temperature of the brake pads and brake discs to rise, but also cause the brakes to fail, which is very dangerous. We can't skate in neutral gear except for not being able to continuously slam on the brakes when driving downhill. Downhill space-time taxiing will cause the car to lose the engine's pulling use, if there is an unexpected situation, the car has no way to stop, the consequences are unimaginable.
In addition, when we drive through a mountain road with many curves and curves, we must control the speed and distance. Especially when entering the corner, be sure to honk the horn in advance to remind other vehicles to avoid collision between the two vehicles.
Well, today's driving skills on narrow roads and mountain roads are mentioned here, do you remember?