Recently, we obtained a set of BYD seal declaration charts, and the new car uses the same front face as the new car-making forces. BYD Seal is a new car based on BYD e platform 3.0, the new car and BYD used to use the "dragon face" design language is different, its front face is some of the taste of new car-making forces, the new car will be unveiled at this year's Beijing Auto Show as soon as possible.
The front face of BYD's seal adopts a very avant-garde style, and the middle of the front face is a groove design, and the upper and lower parts are more prominent, which is very flavorful of the new forces of car making. The headlights of the new car adopt a design similar to the inverted iron style, with a very layered air kit under the headlights, and the bottom end of the front face is a trapezoidal grille with boomerang-style decorations on both sides. The side of the new car's body adopts a family-style shape, the side is decorated with multiple waist lines, its bottom is surrounded by a simple black, and the wheel hub of the new car adopts a very futuristic design and has a dynamic effect.
In the rear part, the new car also adopts a completely new design, and the upper part of the tail is a large groove with through-the taillights laid out. The lower part of the rear of the new car is prominent as a whole, with three-dimensional lines and contour embellishments on it, and the bottom of the car is surrounded by a black trapezoid.
In the details of the declaration, we can see that BYD seals have different styles of wheel hubs to choose from, and the types of wheel hubs are very cross-border. The position of the front face and the bottom bumper of the new car can be embellished with colorful decorative strips, adding some fashion effect. BYD seals have a length, width and height of 4800/1875/1460mm and a wheelbase of 2920mm. In terms of power, the new car has three kinds of power options: 150kW single motor, 230kW single motor, and 160kW/230kW dual motor four-wheel drive.