I. Introduction
Recently, the price of graphics cards has gradually declined, and many friends who want to install the machine before have begun to have some ideas, after all, they have not played games for a long time, and the host has to seize the time to complete.
It just so happens that mushrooms have not been too busy lately, so they help their friends around them install computers. They are very direct, the direct address left me, a lot of hardware directly sent over, I can only be simple and direct, send what hardware to use what hardware, hehehe.
However, some friends still have a lot of ideas, engage in some theme color installation, for example, today's friend, just got a white theme color of the whole machine, it looks very good.
Second, the appearance is exquisite, the heat dissipation is excellent, and the exquisite small chassis installation configuration of the white theme is at a glance
▼The whole machine configuration is at a glance, and it is okay to look at it together.
1. Processor
▼ The processor directly chose 12700K, which is the most cost-effective model in the 12th generation intel processor, and the performance of multi-core and single-core performance is very good, and the price is also OK.
▼ The 12th generation intel processor is long and interesting to watch.
2. Motherboard
▼ Motherboard friends chose rainbow Z690M GAMING FROZEN V20, in the mATX specification of the motherboard, this board is a rare white painted board.
▼ The back of the motherboard packaging introduces various information about the motherboard, the front side has a large area of metal parts covered, and the individual interfaces are assisted by metal reinforcements.
▼ The appearance of the motherboard does look very good, and there are a lot of metal parts covered on the front.
▼ The power supply part of the motherboard, the left side and the upper part, are covered with complete metal heat sinks.
▼ If you look closely, there is also a color strip decoration next to the metal heat sink on the left side, and you will see different colors at different angles.
▼The top metal heat sink has a brushed finish on the surface and a beautiful coating.
▼ On the right side are four memory slots, DDR4.
▼ Under the motherboard power socket on the right, there are two chassis front sockets, one USB Type-A and one USB Type-C.
▼ The lower part of the motherboard is also covered with a lot of metal heat sinks.
▼In the lower left corner of the metal heat sink in the south bridge part on the right side, there are also beautiful ribbons, and there are different colors in different colors.
▼ The main PCIe slot of the motherboard has metal parts auxiliary wrapping to strengthen the strength. Two M2 slots, both with original metal heatsinks, can assist in the cooling of the SSD installed on them.
▼ After removing the metal heatsink, you can see two M2 slots, both of which support the 2280 specifications up to a maximum.
▼ There is also a metal shield in the lower left corner, which should be a sound card chip inside, and there are three golden Nikeacon audio capacitors on it.
▼ Io interface, or quite rich. There are two video interfaces on the left, a DP, an HDMI, and a hardware-less BIOS button next to it. In terms of USB interfaces, four USB2.0, two USB3.2 Gen2, one Type-A, one Type-C, and two USB3.2 Gen1 interfaces are Type-A. The wireless network card interface is two, golden. There are 6 audio interfaces, and light is not supported.
▼ There are six SATA interfaces in the lower right corner of the motherboard, all of which are SATA 3.0.
▼ The back of the motherboard, all white, looks very good.
▼ On the left side of the motherboard, there are RGB patch LEDs, and there are lighting effects here.
▼ In the lower right corner of the motherboard, the audio part and other parts of the motherboard are physically separated, reducing interference and improving the signal-to-noise ratio.
▼ Since the motherboard is removed, the processor is plugged in.
3. Memory
▼ Memory selection is Weigang's Longyao D50 memory, 16G*2 3600MHz, vest is also white, and there is a beautiful RGB light strip on the top.
▼The white vest of the memory is very beautiful and thick.
▼ The effect on the motherboard is good.
4. Solid state
▼The NM800, 1TB capacity version of The Solid State is used by Lexar.
▼ The appearance of the SSD is very beautiful, and the stickers are very interesting.
▼ The solid state is removed, and it is installed directly on the motherboard here.
5. Heat dissipation
▼ Heat dissipation is used in the overclocking three Tokai EX6000, pure white color double fan, six heat pipe, single tower, double fan air-cooled radiator.
▼ The fastener of the radiator is very convenient to install, and it is directly screwed on a metal frame.
▼Then install the heat dissipation on the metal frame, and the overall color scheme looks good.
6. Graphics card
▼ The graphics card selection is Yingchi's RTX3070Ti HOF Pro, the color of this graphics card is pure white, and the white color of the graphics card is still relatively small.
▼ The fan cover of the graphics card is very beautiful, white, and the cooling fan is also white, with only a little blue embellishment.
7. Power supply
▼ Power supply selection MSI's amount MPG A850GF power supply, rated 850W, gold 80Plus certification, all-Japan capacitors, 10 years warranty, the right price, this power supply is still quite good.
▼In addition, in some details, this power supply is also very good. The 8Pin auxiliary power supply line of the graphics card, the original is a single 8Pin design, in the case of full load of the graphics card, the output will be more stable.
▼ The label on the side of the power supply is very beautiful, MSI classic Dragon Shield LOGO.
▼ The heat dissipation grille on the side of the power supply is very good-looking, with a round hole design and a MSI LOGO in the middle.
8. Chassis
▼ Chassis this side of the word, friends chose Xingu's LUX Lax youth version, this chassis is also white, and the front has a large area of side transparency, friends like this design, in addition, the key is that the price is more appropriate.
▼ The chassis is mATX specification, and the motherboard with the mATX specification will be very suitable.
▼ The overall appearance of the chassis is not bad, the outside is white, the inside is black, and it is a bit black and white with a feeling.
▼ There is a large area of transparent shell in front of the chassis, and the inside of the chassis can be seen very well.
9. Chassis fan
▼ In terms of chassis fans, four ARGB chassis fans are handy.
▼ The exterior design of this fan is very interesting, the whole is white, except for the four shock absorbing foams in the four corners.
Third, the appearance is exquisite, the heat dissipation is excellent, and a white theme of the exquisite small chassis is installed
▼ The hardware is almost installed as a whole, and then throw the hardware into the chassis.
▼ After the motherboard is fixed, the space inside the chassis is more abundant.
▼ Then install the chassis fan, here Bought four, the front three, the back one, just right.
▼ After installing the chassis fan, the effect of the whole machine looks much better.
▼ Install the graphics card, this card of Shadow Chi is really beautiful.
▼ The graphics card is installed horizontally by default, and the mushroom is ready to be installed after making a chopstick or the like, and bracing it at the tail of the graphics card is perfect!
▼ Install the power supply, MSI's MPG A850GF power supply, or very good.
▼After the power supply is fixed, the power supply interface of each part is plugged in by hand. In addition, there is an opening on the side of the power supply compartment of the Chassis of Xingu, which can easily see the side of the power supply.
▼Finally cover the side cover of the chassis, remove the film on the outside of the chassis, and the whole machine is installed.
▼ Look closely, there is no boot situation, the appearance of the whole machine is still very online.
▼ Especially the front of the chassis, this is the effect that the mushroom did not expect, the overall look is very good, there is a feeling of Bogu frame, the internal chassis fan, all blocked with glass, there is a sense of refinement that cannot be seen and touched.
▼ Boot, light up at once, the effect of the whole machine is still very beautiful.
▼ These four chassis fans support ARGB light effect synchronization, and the effect is amazing.
▼Combined with the transparent display part of the front of the chassis, the effect is great.
▼ Wei Gang's Long Yao D50 memory, the lighting effect is also very good, there is a small triangle on the side, a little interesting.
▼In addition, the right side of the motherboard also has a lighting effect design, which looks good.
▼ The south bridge part of the motherboard also has a lighting effect, which mushrooms have not noticed before.
▼ In addition, there are four Debug indicators on the left side, but when placed in this position, it is really not eye-catching, but when you want to see it, you can also see it.
▼ There are also some colorful ARGB lighting effects on the side and front of the graphics card, which is not bad.
▼ However, the overclocking three of this East Sea EX6000 heat dissipation, is pure white has no lighting effect, I don't know if there is a chance to change an ARGB fan later.
Fourth, the appearance is exquisite, the heat dissipation is excellent, and a white theme of the exquisite small chassis installation test
▼ The whole machine configuration list, processor 12700K, motherboard is Rainbow Z690M GAMING FROZEN V20, memory is Weigang Longyao D50, solid state is Lexar NM800, graphics card is Yingchi RTX3070Ti HOF Pro.
▼ Simple run a test, the whole machine score 179W, processor 76.4W, graphics card 61.3W, very good.
▼ Mushroom thinks that the most worth buying 12700K, 8 large cores, 4 small cores, and a three-level cache of 25MB, which is not bad.
▼ Simple run test, single core 754.3, multi-core 9270.6, strong performance.
▼ Run a CineBench R23, single-core 1831, multi-core 21355, can be.
▼ Memory stable 3600MHz, timing 20-22-22-44.
▼ Simple run a read and write test, read and write speed in about 48000MB/s, latency of 90.1ns, need to optimize it.
▼ SSD easily runs on PCIe4.0 x 4, stable, standby temperature performance is also OK.
▼ Simple run a test, sequential read speed 7128MB/s, write 5735MB/s, 4K single-threaded read 72MB/s, write 308MB/s, not bad.
▼ The performance of the RTX3070Ti is still OK, 3Dmark's TS mode test, the graphics card scored 14985 alone, which is good.
▼ Finally, the thermal test, the room temperature is 23 °C, the temperature of the processor fluctuates around 30 °C, the core temperature of the graphics card is 35 °C, and the solid state is 36 °C.
▼ Simple run a CPU-Z pressure test, processor power consumption of about 155W, large core turbo frequency 4.7GHz, core temperature 82 °C.
▼ Single-baked FPU test, processor power consumption of about 165W, processor large core turbo frequency of 4.5GHz, temperature 91 °C. Later, you have to go to the motherboard to set up and unlock the power consumption.
▼ 3Dmark stress test, TS mode, frame rate stability rate of 98.5%, quite stable.
▼ The core temperature of the graphics card is about 78.9 ° C, the temperature of the processor fluctuates around 54 ° C, it feels that the chassis fan has played a great role, if the upper part of the chassis is installed with two more, the effect should be better.
5. Summary
This time to help friends install this host feeling is still quite good, especially after the appearance of the installation, the overall effect is OK. Mushrooms personally prefer the effect of the illusion ARGB, maybe friends will directly make the color of the lights all white, maybe it will be more beautiful.
However, the white hardware is still not enough to choose from, if there is more white color hardware on the market, it is better, and the optional space will be larger.
Thank you!
The End