Human beings have never stopped on the road of transformation and invention, whether it is Chinese or foreigners, as long as they have ideas and hands-on ability, they will create many strange things. Some rural people seem to have no culture, but they use their dexterous hands to build a different car.
A rural grandfather abroad especially likes to transform and invent, and he often repairs and transforms the furniture and appliances at home. Once, the old man had a whim and wanted to modify his car. The boss has a Toyota sedan, and because the road in front of his house is relatively narrow, it is very difficult to make a U-turn every time he drives.
The old man found inspiration from the train, and the train has two fronts, which can be used front and back, why can't the car cause the shape of two fronts? The boss wants to transform his own Toyota, if he can make two Toyotas, he will not have to be so troublesome when he turns around in the future.
The old man went to the second-hand car market to pick and choose, bought back an identical car, and he put the two cars together to start splicing and transformation. The boss first removed the tail of his own car, and then he removed the tail of the second car he bought, and now the two cars only have the front part.
The boss first modified the engine of the car, and he spliced the front of the two cars together to create a two-headed car. The shape of this double-ended car is very special, with two fronts and rear fronts, and both sides of the cab retain the steering wheel, throttle, brake pedals. The boss set up a converter in the car, just press the button to change directions and continue driving.
After the vehicle was modified, the boss first drove the car into the narrow alley, and after the vehicle drove to the end, the boss came from the front of the car to the rear of the car. He pressed the converter to switch driving modes, turning the original rear into a new front, and the old man sat in the car and drove the vehicle out of the alley.
Since the car has no rear, the exhaust cylinder of the car has been modified to the side of the body, and special attention needs to be paid when getting on and off the car to avoid being burned by the heat wave emitted by the exhaust cylinder. The boss posted his inventions on the Internet, triggering a heated discussion among netizens, some people think that this old man is also very powerful, and some people complain that his design is useless.
The old man spliced the two cars together to create a two-headed car with a front and tail. The advantage of this car is simply that it can be driven in a different direction without turning around on the narrow road, because the shape of this car is more special, is it retrograde or reversed after driving on the road?
The original design of the car was the front, carriage and rear, and these three parts were more stable. The old man forcibly divided the car into two, and spliced the front part of the two cars together, although he changed the engine position and the position of the fuel tank, but this transformation was obviously unsafe, and driving this splicing car on the road was dangerous.
Editor's Comments:
The old man can find inspiration from the train, and it is a good idea to stitch the front of the two cars together, but it is still difficult to turn this idea into a fact. This old man just forcibly connected the two cars together, driving such a car on the road will have a lot of safety hazards, China prohibits the assembly of cars and illegal modification of cars on the road, this situation will never be achieved in China.
The pictures in this article are from the Internet, if there is infringement, please contact to delete