laitimes

Hongqi's first MPV "C095" completed extreme cold testing and is expected to be mass-produced in June 2022!

Hongqi's first MPV "C095" completed extreme cold testing and is expected to be mass-produced in June 2022!

Recently from the front of the news, FAW Hongqi codenamed "C095" MPV once again ushered in good news! The new car has already completed extreme cold testing in the test area, and according to the scheduled plan, the MPV is expected to be in trial production in early 2022 and officially mass production in June 2022. In terms of power, it is expected to carry a power combination of 2.0T+8AT!

Hongqi's first MPV "C095" completed extreme cold testing and is expected to be mass-produced in June 2022!

The above picture is the launch ceremony of the extreme cold test of some of the test vehicles of Hongqi, from the information obtained in the figure, in this extremely cold test, in addition to the first MPV of Hongqi, there is a large SUV, if I guess correctly, it should be the Hongqi LS7, and the other two cars may be a new generation of Hongqi H5! Of course, today's protagonist is the MPV code-named "C095"

Hongqi's first MPV "C095" completed extreme cold testing and is expected to be mass-produced in June 2022!

Judging from the exposed road attempts, this MPV shows a more powerful aura, and in front of this car, even Toyota's Alpha is instantly dimmed. We saw that the entire front of the car adopted a square-shaped design, the huge straight waterfall grille occupied almost the entire front face, the top of the hood also had the iconic "central axis" mark, and the headlights were not lit, but it was basically certain that it was consistent with the Height of the Hongqi H9! The connection between the headlight and the grille is a golden LED strip, and the effect after lighting should be very good.

Hongqi's first MPV "C095" completed extreme cold testing and is expected to be mass-produced in June 2022!

From the currently exposed side, the entire embedded waist line makes the body more slender and stable, and the new car is equipped with electric side sliding doors, rear privacy glass, and suspended roof equipment as standard, further enhancing the sense of luxury. We also saw that the car's five-spoke petal wheels with a brand new look added a little bit of fashion! Compared with the shape of the front of the car, its tail is more sporty, such as the roof is also equipped with a small tail wing shape, the embedded waist line also runs through the entire rear, and the exhaust is all hidden at the bottom of the low body, making the whole car look more complete.

Hongqi's first MPV "C095" completed extreme cold testing and is expected to be mass-produced in June 2022!

Let's talk about its power performance, according to known information, this MPV will be equipped with two sets of powertrains, namely 2.0T and 3.0T two kinds of power, of which the 2.0T engine or matching 48V light mix system, the transmission system is an 8AT hand automatic transmission. While the 3.0T supercharged V6 engine, drivetrain or matching 7-speed dual-clutch transmission. At present, the new car has completed the road test, according to the plan, the new car will be trial production in early 2022, and the official mass production will be in June 2022, I don't know what you expect from this car!

Read on