1. Strengthen the management of safety protection of key parts of construction
For the elevator up and down exits, staircase openings, passage openings, construction reserved openings, balcony openings, edge openings and other key parts that are prone to safety accidents, safety protection measures should be provided, such as the installation of protective railings, protective nets, cover protection, etc.
2. Strengthen the standardized management of the erection of safety nets
In the construction of construction projects, the erection and installation of safety flat nets and vertical nets are very important, and the standardized installation must be carried out in strict accordance with the requirements, so that the erection of the hierarchical sections of the safety net is scientific and reasonable, and the purpose of strict safety protection of the construction floor is achieved.
3. Strengthen the management of safety protection in "border" dangerous areas
In the construction process, there are many "border" areas are safety accident-prone areas, such as the balcony and the edge of the staircase that have not yet installed the railing, the roof that has not erected external protection, the floor perimeter of the unbuilt wall, the outer edge of the loading and unloading platform, etc., these must take corresponding safety protection measures to prevent materials, personnel, etc. from falling from a height.
4. Strengthen the safety management of cross construction operations
The phenomenon of cross operation is often encountered in the construction of construction projects, and safety accidents are more likely to occur, so corresponding safety isolation and protective measures must be taken, for example, the upper operation should be covered with wooden planks on the scaffolding, and baffles, barricades, etc. are erected on the outer side of the scaffolding, so as to prevent the fall of materials and personnel.
5. Strengthen the safety management of high-altitude metal structures
For all kinds of high-altitude metal structures in the project, if their height exceeds the original lightning protection facilities in the surrounding area, they will be easily attacked by lightning, and lightning protection facilities should be added to make them have the ability to protect against lightning strikes.
6. Strengthen the safety management of large-scale concrete formwork and high-rise scaffolding
For large-scale concrete formwork projects and high-rise scaffolding projects of more than 30 meters, due to their own heavy weight, it is necessary to calculate and verify the load-bearing capacity and load to ensure that the construction can be carried out safely.
7. Strengthen the safety management of vertical transportation equipment
For vertical transportation equipment such as tower cranes, gantries and well-shaped material hoists, it is necessary to ensure that their installation and fixing methods are firm and reliable, and set up necessary safety protection measures to avoid major safety accidents.
8. Strengthen the management of safe electricity use in construction
Under normal circumstances, the distance between the overhead line and the engineering building should not be less than the minimum safe operating distance, otherwise safety protection measures such as setting up insulation barriers and safety protection nets, hanging warning signs must be taken. In addition, if the temporary electricity consumption of the construction ≥ 50KW or more than 4 temporary electrical equipment, the temporary electricity consumption shall be prepared, organized and designed.
9. Strengthen the safety management of seasonal construction
During summer construction, various cooling measures should be taken to prevent heat stroke, such as adjusting the working time and rest time of indoor and outdoor construction, enhancing the ventilation of the construction site, reducing the heat radiation of the construction site, etc.; In the rainy season, the main thing for civil engineering is to prevent collapse accidents, and for outdoor construction, it is necessary to prevent slip and lightning strikes.
10. Strengthen the safety management of flammable and explosive materials
For the stacking place of flammable and explosive materials, the lighting must be explosion-proof lamp, and away from the fire source, fireworks are strictly prohibited, and the necessary fire extinguishers are configured.