Did you know that the intrinsically safe conveyor misalignment sensor for mining is a common mining equipment?
The intrinsically safe conveyor deviation sensor for mining is a common mining equipment, which is intrinsically safe and can be used in various flammable and explosive environments filled with coal dust and methane. This kind of equipment is mainly installed on the brackets on both sides of the belt, and the belt does not touch the deviation lever under normal circumstances, and the two terminals of the sensor are not connected.
However, when the belt misalignment touches the misalignment lever and pushes the lever 30°±3° away from the normal position, the two terminals of the mine intrinsically safe conveyor misalignment sensor are connected. When the mistracking lever automatically returns to 15°±3° after the belt is reset, the two terminals of the sensor should be disconnected. When installing, the sensor needs to be installed on the brackets on both sides of the belt, and then the sensor junction box is opened, and the E deviation signal and O power supply are connected to the corresponding terminal blocks in the host of the belt conveyor protection device with a cable.
The misalignment sensor of the mine intrinsically safe conveyor has a great effect, which can monitor the deviation of the belt in real time and ensure the normal operation of the mining equipment. Follow us for more information!