Mold saving workbench, heavy-duty mold workbench
Machining workbench, steel plate maintenance workbench, mold fitter workbench
It can be configured with drawers, hanging boards, hanging cabinets, light stands, etc.
Heavy-duty composite table: 1: The overall overall dimension is 1500W*750D*800+1000H;; 2: The countertop adopts 50MM thick beech finger joint, the surface is transparent paint treatment (natural air drying), and the edge is sealed at right angles with beech wood edge banding strips, color: log yellow; 3: THE OVERALL FRAME IS MADE OF 2.0MM THICK COLD-ROLLED STEEL PLATE BENT, TABLE LEG SECTION: 100*50MM, BEAM SECTION: 80*50MM, THE OVERALL LOAD CAN BEAR 1000KG; 4: 1 side cabinet with 411W*572D*700H on the left side of the counter, drawer configuration 100*2 150*1 250*1 Each drawer can bear 80KG and can be withdrawn by 85%, and all are equipped with full-width aluminum alloy handles and safety locks (no separation in the drawer); 5: The platform is equipped with 1 set of 1000mm high columns, connected by triangular supports on both sides, equipped with 3 300mm high hanging plates (2 square holes, 1 louver, including 1 shed board), and the top is equipped with light boards (excluding lamps); 6: The overall surface is pickled, phosphating, electrostatic spraying, and the color is machine tool green;
