Z3050 rocker drilling machine, capital letter Z is the abbreviation of drilling machine, 30 for rocker arm, back 50 for drilling diameter, × 16 for arm length, Z3050×16 rocker drilling machine is suitable for drilling, reaming, reaming, plane and tapping thread work of medium and large parts, and boring can be carried out under the condition of process equipment.
The Z3050 rocker drilling machine is mainly composed of the following parts:
1. Worktable: It is the basic component of the rocker drilling machine, which is used to support and fix the workpiece.
2. Spindle: is one of the core components of the rocker arm drilling machine, which is driven by the spindle box to transmit the rotational motion to the drill bit or other cutting tools.
3. Headstock box: is a composite component, which includes the main drive motor, spindle and spindle transmission mechanism, feed and speed change mechanism and machine tool operating mechanism and other parts.
4. Rocker arm: is one of the important parts of the rocker drilling machine, one end of it is a sleeve, set on the outer column and do up and down movement.
5. Outer column: can rotate 360 degrees around the inner column, one end of the rocker arm is a sleeve, it is set on the outer column to do up and down movement.
Inner column: fixed at one end of the base, with an outer column on the outside.
Base: is the basis of the rocker drilling machine, which carries the weight of the entire machine. #Mechanical Equipment Dictionary# # Drilling Machine 3040 # # Machinery and Industry Equipment # #机加工那些事儿#
