Floor cleaning can be said to be one of the most cumbersome household chores, in daily life, we not only need to clean the ground every day, but also face the problem of poor cleaning of the bottom of the sofa, the bottom of the cabinet, the corner of the table and other corners. And this is not the end, after the ground cleaning is completed, but also to clean up the garbage, cleaning the mop, a whole set of processes down, time-consuming and laborious. Fortunately, this is the era of technology, and an all-round sweeping robot can free us from heavy housework.
Compared with the single-function sweeping robot, the sweeping and dragging machine with integrated mopping function is the mainstream at present, which has to mention stone technology. After a long period of research in the field of intelligent cleaning, stone technology in the technological innovation and user experience continues to be at the forefront of the industry, its launch in March this year of the stone self-cleaning sweeping robot G10S series, not only brings together the current sweeping robot in many high-end functions, but also supports automatic dust collection, cleaning mop, automatic water change, electric drying and other functions, can be said to be "high-energy advanced, one step in place".
In the sweeping and dragging ability that everyone is generally concerned about, the stone G10S series has added Max+ gear, the maximum suction force has been increased to 5100Pa, and the cleaning power of the floor/carpet has been greatly improved, which is very suitable for users who have high requirements for the sanitary environment and prefer deep cleaning. At the same time, the new generation of main brush fully using TPU soft glue material, can effectively reduce hair entanglement, with Archimedean spiral design, cleaning can allow most of the hair to be directly sucked into the dust box by the fan, a small part will go to the main brush on both sides of the detachable storage silo, without tools can be easily cleaned.
In terms of mopping, the stone G10S series uses sonic vibration to wipe the floor, 3,000 times per minute, even stubborn stains can be efficiently disintegrated. In order to further enhance the mopping effect, the G10S series also added a fine slow drag mode, which reduces the speed of the machine, allows the mop to wemer the stain for a longer time, and has a better removal effect on stubborn stains.
After the mopping is complete, there is no need to manually clean the mop. Stone G10S series supports self-cleaning of the mop, during the mopping process, the robot will automatically identify the mop state back to the base station, and clean the mop with clean water. The interior of the base station uses a high-speed self-cleaning brush of 600 rpm to rotate the brushing mop on the surface of the mop, which is cleaner than the general hand wash mop.
After cleaning, the sewage will be uniformly scraped into the sink under the movement of the rubber scraper and then poured into the sewage tank, the sink is placed under the one-way scraper, with the cleaning module, it will automatically scrape the sewage in the cleaning tank, so after the mop is cleaned, the base is also clean, and there is no need to clean it separately.
The addition of automatic dust collection allows the stone G10S series not only to wash the mop, but also not to dump the dust box frequently, further liberating the hands. The Stone G10S series is equipped with a 2.5L dust bag, which can be thrown away once every 60 days. At the same time, it adopts a double-wind dust collection design, with 27000Pa super suction force, quickly emptying the dust box. And the dust bag uses E12 grade filter material, which can effectively inhibit bacteria and reduce dust pollution. The dust bag will also be automatically sealed when it is removed, so that the hands are not dirty throughout the whole process and secondary pollution is avoided.
In addition, the stone G10S series of fresh water tanks added a sustained release silver ion module, which will not only release silver ions into the clean water, as the cleaning is carried out, but also transfer the silver ions to the ground and sewage tank, with antibacterial mop, to achieve full-link bacteriostatic.
In terms of obstacle avoidance and navigation, the Stone G10S series also has a good performance. Among them, G10S uses structured light + black and white image sensor recognition + infrared fill light, G10S Pro uses structured light + RGB camera recognition + LED fill light. Both have AI recognition technology that can identify the specific type of obstacle for strategic obstacle avoidance.
And we can personalize the stone G10S series through the Roborock App, usually through the mobile phone can direct it to complete the cleaning, mopping and other tasks, in this process, the stone G10S series is completely automatic. It can be said that with the G10S series, basically bid farewell to the trouble of ground cleaning, whether it is early or late, as far as the eye can see, it is as clean as new, and the fatigue of the day will be swept away.