The article comes from Zha Hi Network user Perch King Million
Hello, hello, not long after the release of the last issue of content I received a new product, that is, the nut just released the J10S projector, most people in the comment area want to see it and Dangbei F5, Jimi H3s, Dangbei x3 comparison, as a selective Bing blogger, this issue of content first do a J10S fast unboxing, the second half is its and Dangbei F5, Jimi H3S video and audio quality game detailed comparison.
Smart projectors at this price point are packed quite tightly and the accessories are similar.
In addition to the main projector, there are instruction manuals, power cords, and remote controls.
The appearance of the J10s doesn't look much changed, and it can be seen from the naming that this is a small makeover, and I put the previous j10 together with it, and there is really no difference. The layout of the front lens has been slightly changed, and the letters marked on the front have been changed.
The previous generation J10 was written about smart home theaters.
J10S was changed to Laika Barabala.
The layout of the back interface part has not changed, from the product detail page to see the hdmi interface upgraded to 2.1, the interface layout has not changed, starting from the left are 2 usb 2.0, 2 hdmi, plus s/pdif audio interface, network cable interface and power interface.
The appearance part is like this, and then focus on the highlight of the J10S upgrade, the product introduction says that it is the Lycra color jointly developed with Leica.
Some people may not know much about what Leica is, I will give you a popular science, Leica is a German camera brand, expensive price is Leica's brand logo.
Open the video settings and select the image modes for Leica Standard D65, Leica Vivid, Office, and User Defined.
Switching between the two Leica modes back and forth with a picture doesn't seem to change much, and I don't know if it's only effective for video.
I take the Batman trailer as an example to show you, the left side selects Leica standard D65, the right side selects Leica bright, and the other settings are consistent.
Judging from the contrast between the two sides, the overall tone difference is not large, the color on the right will be a little darker, I personally feel that the Leica standard on the left looks more comfortable, so which of the two modes is closer to the original film?
I imported the footage into the computer and added the original film to compare, (I was silent). What went wrong? Is it a problem with Leica, or is it a problem with Sony (camera)?
I hadn't seen the trailer at the time of shooting, so it felt pretty good at the time, and the camera settings also tried to restore the picture seen by the human eye, although the final imaging and the naked eye will definitely have a certain difference, but it can be concluded that Leica color did not accurately restore the original color of the movie, it obviously has its own ideas about color.
Next join the Dangbei F5, Jimi H3S together to see, this time I optimized the shooting method, not only dismantled the curtain but also repainted the white wall, three machines are thrown, projecting the same size of the picture, the lower left corner put a 27-inch display of Youpai as a reference.
The main computer serves as the input source and connects 4 devices separately through a quarter-splitter. Compared with the previous individual shooting re-puzzle, this shooting method maintains the output equipment, ambient light and camera settings exactly the same, and the comparison results are closer to the real feeling.
Due to the different distances, the camera focus can only choose between the wall and the display, and the display is used as a reference group, mainly used to refer to the color, so the focus will be based on the projection screen.
Brightness is standard (nuts are balanced), and image modes use their default options.
Next, start with the lights off environment, play the Batman trailer again, and the movie with dark color as the main color is easier to see the difference.
The nut J10S in the upper left corner is still so unique, this time it is no longer the traditional green art, after adding Leica color grading, the overall bias is a graceful and luxurious purple, I don't know if this is Leica's original intention.
The Dangbei F5 color in the upper right corner is a little warmer, and the face of the character looks whiter than on the monitor.
The overall tone of the Jimi H3S in the lower right corner is cold, and the face will appear blue from the light scene.
I pause to show you, in this scene, only the upper right corner of the picture can see that Catwoman is opposite Batman, the lower right corner looks like a vision with cat ears, the upper left corner is obviously the transformed Black Panther, in this scene when the color of the Bay F5 is the best restoration.
In addition to the difference in color grading, brightness also plays a great role, it will adjust the highlight part of the picture to a relatively high, in the dark detail display is advantageous, but in a relatively bright scene, it will cause some of the picture to be too bright and white, so in different places to pause, when the performance of Bei F5 and Jimi H3S have their own advantages and disadvantages, nuts have been stable.
Next, take a look at the lighting comparison, this time playing the trailer of Doctor Strange 2. After turning on the lights, the pictures of the three projectors are white to varying degrees, here is the top light on the ceiling, the bottom of the pole meter H3S distance is the farthest, so it will take advantage of the point, the limited space can not be absolutely fair, everyone is more inclusive.
External light has always been a problem that projectors need to face, after the ambient light and projection screen are superimposed, the overall color will change to varying degrees, in this clip at will pause, you will find that their color reproduction ability is different in different pictures, and sometimes even the advantages of nut J10S can be found.
For example, the face restoration under this picture now, when the Bei F5 and jimi H3S are a little red, the nut J10S looks the closest to the color of the monitor, and then it may be different, which is the benefit of the video experience, allowing you to see the whole of a projector, not only the side that is good for him.
Next is the game experience, these three games support low-latency game mode, first look at the picture of the game mode, the test game is the "Relics: Ashes Reborn" on EPIC, everyone should be able to see that the screen of the three projectors is obviously half a beat slower than the monitor screen, how much slower, or use the old way to see.
Starting from the monster health bar displayed on the lower left corner of the monitor, after 4 frames, the projector arrived at this picture, in this video of 30 frames per second, the delay of the projector is 1000 divided by 30 times 4, which is about equal to 132 milliseconds, and the performance of the three projectors is basically the same.
Next I open the game mode, nuts only have on-off options, when The Shell can choose standard and speed, Pole Meter can choose basic and speed, the difference between the two modes is mainly whether you can shoot sideways, first compare three projectors in the mode that can be side-cast.
In the dynamic picture, it feels like the picture of the projector and the monitor are already the same, and I can't see the difference anyway.
Using the way just viewed frame by frame in the PR, it is estimated that after opening the game mode, when the delay of the Bei F5 is less than 1 frame, that is, less than 33 milliseconds, and the pole meter and the nut are between 1-2 frames, it should actually be very close to 1 frame, and it is estimated that it is about 33 milliseconds.
In the game mode that can be side-cast, the delay of the three projectors is very close, when the Bei F5 has a slight advantage, and then the speed mode delay below I can't shoot it, who has a more accurate test method can share it in the comment area. If you have a game need, it's important to have a game mode, and for non-professional gamers, the projector delay in game mode is no different from the monitor.
All that's left is the usual trapezoidal correction and autofocus functions, all three projectors.
The correction accuracy rate is not bad, the correction speed is relatively fast in the rice and nuts, and the shell will be slower.
Nuts and Dangbei both have a far-field voice function, and Jimi only has a remote control voice.
When the remote control of Beibei and Jimi is made of metal and plastic, it is more textured to hold in the hand, and the remote control of the nut has not been upgraded this time.
Well, this simple comparison ends here, the nut J10S this upgrade mainly upgraded an S, looks more advanced, the appearance is as good as since.
This is the end of the content, everyone bye-bye.