I. Introduction
Recently, this situation has been more serious, and many times it is necessary to work from home. However, working from home is not something you can do if you want to do it, at least you have to have a computer, the computer includes the host, monitor, mouse, keyboard, these must be taken into account. Monitors, mice, keyboards and the like, you can buy and buy at will, but the host is not OK, you have to match according to your own needs.
A friend of Mushroom's approached me and wanted to install a host that could be taken away directly and had a certain amount of performance, and there was no better solution.
This need is actually very simple, choose a suitable chassis, the rest is to choose the right hardware to plug in. Overclocking three recently listed hummingbird i100 PRO MESH version, the side transparency design replaced by a metal punching mesh, the overall texture is better, more robust, daily carrying is more convenient, at least this ability to resist bumps, is to be stronger.
Second, overclocking three hummingbird I100 PRO MESH chassis unboxing
▼ The packaging of the chassis is very familiar, the left side is the model, and the right side is the appearance.
▼ The relevant parameters of the side organic box, this design of the chassis to see the parameters is very important, you need to understand the height of thermal compatibility, graphics card compatible length and thickness and so on. This chassis, the heat limit height of 60mm, the length of the graphics card is limited to 300mm, if the installation of a 3.5-inch mechanical hard disk, the graphics card length is limited to 180mm.
▼ The packaging inside the chassis is not bad, and there is thick foam on both sides.
▼ The accessories inside the chassis are very simple, the main body of the chassis and an accessory bag, which has screws, instructions, cable ties and other accessories.
Third, overclocking three hummingbird I100 PRO MESH chassis appearance
▼ The appearance of the chassis is very beautiful, and there are large metal punching holes on the sides, and the texture is very good.
▼ The front of the chassis is a whole metal plate, and there is an overclocking three LOGO at the bottom.
▼ The back of the chassis, the same design of the metal plate, there is a dense metal punching design, the heat dissipation effect should be quite good.
▼ Chassis tail, on the left is the IO opening of the motherboard, on the right is two vertical video card PCIe slots, and in the upper right corner is the power connector.
▼ There is a handle at the top of the chassis, and there is a part in the middle with a fine metal punching design. In the lower right corner is the IO panel of the chassis, a power button, a USB3.0 interface, and this chassis can also be optionally equipped with a C port.
▼ The workmanship of the handle is not bad, and it looks very meticulous.
▼ At the bottom of the chassis, four large non-slip foot pads. In the middle is a special-shaped magnetic metal dustproof net, and the four sides of the side of this chassis can all enter and exit the air, which is not bad.
▼ The sides of the chassis are metal plates, and metal punching is carried out on top, which can not only have a certain strength, but also ensure heat dissipation.
▼ The space inside the chassis is designed and the same as the previous generation, the motherboard and graphics card remain back-to-back.
▼The right side is the motherboard fixed position, flip design.
▼ The left side is the fixed position of the power supply, the upper part has a special power supply bracket, and the rear side has a hollow design to facilitate air intake.
▼ The back of the chassis is all the location of the graphics card, from left to right.
▼ However, there are several fixed holes on the metal plate on the right part, where the hard disk can be fixed, if the hard disk is fixed, it will affect the length space of the graphics card, and more attention needs to be paid.
Fourth, the overclocking three hummingbird I100 PRO MESH chassis is installed
▼ The chassis is determined, the configuration has not yet been determined, mushrooms here just use the 5600X + X570I configuration to test it, see how the effect is.
▼ The motherboard is installed upside down on the right side of the chassis, remember to install the motherboard before, you need to plug in the PCIe extension cable of the graphics card first, don't ask me how to know!
▼ The power supply is an overclocked three vanadium star FX500, with a rated power of 500W SFX power supply.
▼ The power supply is hung directly on the left side of the motherboard, and the mushroom here fixes the power supply fan to the inside, which can assist the graphics card to dissipate heat when standby, and slightly sacrifice the heat dissipation of the power supply when fully loaded.
▼ The graphics card is a friend's newly purchased Sotec RTX3050 X-GAMING OC graphics card, I heard that it is the cheapest, excellent appearance 3050?
▼ Although it is a three-fan graphics card, the length does not exceed 300mm, and it can be easily tucked into this chassis.
▼Finally cover the two sides of the chassis cover, the whole machine installation is completed, you can see that the volume is still very small.
▼ The metal plate on the side of the chassis can be replaced, and the mushroom side directly changes the horizontal bar part to the top, so that more fans face the metal punching mesh.
▼ Boot, light up at once, haha, no side transparency, can not see the effect of the interior.
Five, overclocking three hummingbird I100 PRO MESH chassis testing
▼ The whole machine configuration is listed, the processor is 5600X, and the graphics card is Sotera's RTX3050 X-GAMING OC graphics card.
▼ Simple run a whole machine test, the processor score 55.9W, graphics card score 28.7W, the total score of 105.8W, or very powerful.
▼ Room temperature is about 22 ° C, daily standby situation, the temperature of the processor fluctuates around 51 ° C, AMD's original pressure heat dissipation is not OK, friends have bought a six heat pipe of the lower pressure heat dissipation, and then to the replacement.
▼ Simple run a CPU-Z pressure test, 5600X open PBO2, processor power consumption should be around 80W, 71A current, 1.2V voltage, almost, full core turbo frequency 4.35GHz, processor temperature 95 °C.
▼ Single-baked FPU test, processor temperature 95 °C, full core turbo frequency 4.125GHz.
▼ 3Dmark stress test, the frame rate stability rate of 99.2%, this result is still very good.
▼ The core temperature of the graphics card is up to about 69 °C, and the temperature of the processor fluctuates up and down at about 59 °C, and the overall thermal performance is OK.
6. Summary
The overall performance of the overclocking triple hummingbird I100 Pro MESH chassis is still very good, and the metal side panels with metal punching have been replaced on both sides of the chassis, and the overall texture of the chassis is better and feels more robust. Usually carrying out the door, the strength of the side plate is higher, and it is not afraid of bumping.
In addition, the interior space of the chassis is more interesting, the tail part of the graphics card, and the fixed bit of the hard disk. If you choose some short cards to use, you can also expand the mechanical hard disk, which is a bit interesting.
In terms of heat dissipation, look at the full load test of the graphics card, the heat dissipation of this chassis is still quite good, and there are metal punching meshes on all four sides, and the air outlet and air inlet are very convenient.
Thank you!
The End