Click below to subscribe to the Beginner's Cheats Season 3 column to watch 50 episodes including this one
I'm going to take a look at the environment I'm going to operate in the field today, which is a commercial door in the corner of an intersection, and I drive over and turn left. The camera looks from right to left, an electric tricycle with a sedan parked in front of the tricycle.
Looking further to the left, there is an aisle where you can see a white car and a taxi parked downstairs, and a black car on the left hand side.
From the left window, you can also see that there is also a red car parked on the left and a white car on the left and left front of the black car. I'm now going to turn left in front of the front of the black sedan to see if there's a left turn.
In order to facilitate everyone's stereoscopic experience, we have arranged the left and right rearview mirrors and the first viewing angle in the video screen at the same time.
Now the front of the car is curved from right to left, and after turning the tricycle, an open area appears in front of it, and I intend to turn left around the black car on the left in this open position.
I need to swing the front of the car to the right, drive forward in the direction of the right, and visually hit the left when the front edge of the hood and the bumper of the vehicle in front of me are about 30 centimeters. Visual inspection refers to the distance felt in the car rather than the actual distance, which is greater than 30 centimeters.
You can see that the front edge of the hood is aligned with the taxi bumper and curves to the left.
At this time, the left side of the left rearview mirror has been very close to each other, especially the left rearview mirror goes forward to the left wing plate, and then hits the left direction to scratch the left vehicle.
The purpose of going back to the right direction is to make the body as far forward as possible, so that when you turn left, the left inner wheel difference will not be as large as the tangent line, and it will not rub into the bumper of the left vehicle.
Stop and let the pedestrians pass first. You can see the first pedestrian above the knee in front of you,
The second pedestrian is about one point down on the knee, which indicates that when the reference is made to the character, the reference point is related to the height.
Now the lower edge of the front license plate is almost aligned with the edge of the hood of my car, and the distance in front is at least 50 centimeters. Just now I saw the calm look of pedestrians passing, indicating that the distance is very safe. At this distance, hit the left, the front of the car will turn left, and the right side of the bumper will continue to approach the car in front.
Now let's see how to judge this limit distance, now my car hood edge in front of the car license plate font under the edge, its vertical height is lower than the height of the hood edge I saw, the front reference is lower than the height of the hood of my car, indicating that there is still a distance in front,
Hit the left to draw an arc in the front of the car to the left, and continue to approach the front car in front of the right side of the hood.
Now that you see the hood aligned with the front car, the position is gradually raised to the lower part of the bumper of the front car, and this distance is more extreme. This is the method of judging the distance between the two cars through the vertical height horizontal line, and it is also the most practical method, that is, the method that the old driver often says that it cannot be described by feeling.
Alternately look at the left rearview mirror, the left body is about 10 cm away from the left side of the vehicle, this distance should be particularly careful. Keep an eye on the electric car and bike in front of you, drive forward to the limit, and go back in a direction.
This close to the electric vehicle, especially the left side of the electric vehicle is the closest to the front of the car, or according to the method just now, let the hood edge and the steel beam of the electric seat aligned, the height of the alignment electric vehicle is not high, but the rear wheel of the electric vehicle is outside, this factor should be taken into account.
Okay, hang the upside down gear to the right and slowly hit the direction, at this time to look at the left rearview mirror, because hitting the right direction will make the front half of the left side of the car closer to the left, the left side is now less than 5 cm or so of space, if the direction of the hit is not careful enough, it will produce scratches.
Okay, now that you can see the upper edge of the rear wheel of the electric car in front, the left side of the body is close to the limit.
Hang the front gear to the left, or the left rearview mirror and the front alternately observe, the left side is to observe the left and right distance, and the front is to observe the alignment of the hood edge and the electric seat steel beam when the front is turned. When aligned with the steel beam, the arc top position of the arc drawn to the left in the front right corner of the hood has reached its limit, and then the distance to the left will be widened, that is, it can be passed.
Although the front of the car can pass, the body is still swinging to the left, and it cannot pass straight. Continue to play to the left, observe the left rearview mirror and the left front corner, you can see the upper edge of the wheel hub of the left vehicle tire, and then start to move in the direction of the right hit,
Approaching further on the left side of the forward, you can see the upper edge of the tire, and the distance has reached its limit.
Observe that the right rearview mirror does not rub into the right side of the electric car, the left distance is also very limited but can pass.
Don't be careless after passing in the front half of the car, let the left side of the front of the car drive forward along the nearest distance of the left vehicle, and slowly turn back to the right, while passing and returning to the right direction.
Okay, the vehicle went through tough twists and turns, and finally completed in a narrow space without scratching and successfully passed.
This tortuous, narrow space through the demonstration, contains more knowledge points, including turning, back, horizontal height method distance judgment, adjust the body direction and other comprehensive skills, everyone in the learning to pay attention to repeatedly watch the video, understand the skills and ideas, and gradually apply to their own driving practice.
Dear old and new friends, a total of 50 videos of "Beginner Cheats - Season 3" have begun to be updated