With the introduction of cars into our lives, almost every family now buys a suitable car for themselves. But most people sign off to pick up a car when they buy a car. But the inspection before picking up the car is not a trivial matter, it is also very important, if you do not do these pre-purchase inspections, then after signing, those salesmen will be very happy behind the scenes.
When buying a car, the car sales are often most afraid of consumers' inspection of these places, if you can do it for the car sales to change, do not dare to casually fool you, we can also, can also be as an old driver to pick up the car, buy a car. Where are we? Now let's take a look.
Point 1, check the nameplate of the vehicle leaving the factory.
The nameplate of the vehicle leaving the factory is equivalent to the general existence of the ID card, and all the conditions of the car will be written on the nameplate, such as the brand of the car, the frame number, the engine model and power and the time when the vehicle left the factory will be recorded. Under normal circumstances, the date of the imported car leaving the factory will not exceed 6 months, and once it exceeds 6 months, then the car is most likely a stock car.
Point 2, check the production time of automobile tires.
In general, there will be 4 numbers on the side of the car tire. The meaning of this number is the date of tire production. The first two digits of these 4 digits are the year the tire was produced, and the last two digits are the current year, the first few weeks of production, for example, 1202 is the tire produced in the second week of 12 years. When we find that the production date of the tire is significantly later than the date written on the nameplate, then we should pay attention to the fact that this may be a remade after the retreading of an accident car, or it may be a tire that has been reconfigured after the previous tire has been damaged.
Point 3, the inspection of automotive glass.
For a normal vehicle, there will be an obvious production date on the glass of his car, and we should pay attention to whether the vehicle has this production date. The date of manufacture usually appears on the last line of window information and consists of several dots plus numbers. Generally the number of points is in front of the number, it is to subtract the number of points with 7, if the number is after the number, we have to use 13- points to get the month of the glass production, and the number generally represents the year of the glass production.
In general, all automotive glass production months are later than the time of automobile production, and if the production date of automotive glass is significantly earlier than the time of automobile production, then we should consider whether we have also mentioned a damaged car that has long been damaged.
Point 4, check whether the car's exhaust pipe has a large amount of black carbon deposits.
When we pick up the car, you must pay attention to check the exhaust pipe of the car. Often the new car will not have a particularly large amount of black carbon, of course, if we touch a lot of black carbon, then it means that the car has been running for a long time. Then we have to think carefully about this car at this time. When buying a car, you must do all the checks in the car, otherwise you will spend money and suffer losses, which is really not worth it.
So old drivers, do you have anything else to check when buying a car? Welcome to leave a message in the comment area. The image comes from the Internet, if there is infringement, please contact to delete.