In the past few years, the USB PD3.0 fast charging standard has achieved full popularity, but its 20V5A 100W power ceiling has limited the development space and it is difficult to better serve high-performance digital devices and high-power electronic products. In May 2021, the new generation of USB PD3.1 fast charging standard was released, breaking the original 100W bottleneck limit and adding higher voltage specifications such as 28V, 36V, and 48V, so that the performance ceiling can be increased to a maximum of 240W.
Recently, IDMIX has created a new generation of 140W Gallium Nitride charger based on the new standard of fast charging, which supports PD3.1 28V 5A fast charging output, is backward compatible with existing PD3.0, PD2.0 and other specifications, and puts up to three output ports to support multi-device charging at the same time, and the volume is only the size of Apple 61W charger.
IDMIX 140W Gallium Nitride Charger uses programmable digital power supply technology + PFC + LLC to create an efficient power supply architecture, and uses two new semiconductor materials of gallium nitride + silicon carbide to greatly improve the conversion rate, so that the high-performance specifications are concentrated into a small shell, the three-dimensional size is only 74mm X 74mm X 30mm, the volume is 164.28cm, and the power density is 0.85W/cm. It is very close to the size of the Apple 61W single-port charger, and compared with the apple 140W charger of the same power, the volume is reduced by about 25%.
At present, the common PD3.0 standard power limit can only go to 20V5A 100W, while PD3.1 has a higher output ceiling. IDMIX 140W Gallium Nitride Charger USB-C1 interface is based on the latest generation of PD3.1 fast charging standard development, support 28V5A 140W high-power output, can feed the Support PD3.1 Fast Charging Macbook Pro 16 2021 full blood fast charging needs (with Apple's original PD3.1 magnetic data cable).
When the three interfaces are used separately, USB-C1 supports 5V3A / 9V3A / 12V3A / 15V3A / 20V5A / 28V5A Six fixed voltage output stalls with a maximum output power of 140W; USB-C2 supports 5V3A / 9V3A / 12V3A / 15V3A / 20V5A five fixed voltage outputs with a maximum output power of 100W; USB-A supports 4.5V5A / 5V4.5A / 9V3A / 12V2.5A / 20V1.5A, maximum output power 30W.
Compared with the original single-port charger, IDMIX 140W Gallium Nitride charger has a total of three output ports of 2C1A, according to the number of inserted devices, intelligent distribution of power performance of each interface, in 140W, 100W, 30W, 100W + 20W, 100W + 18W, 100W + 5V4A and other power distribution strategies between intelligent adjustment, travel only need a charger can provide charging services for three devices at the same time.
In order to take care of cross-regional travel users, IDMIX 140W Gallium Nitride charger supports 100-240V ~ 50/60Hz global grid use, the fuselage adopts a folding pin design, when taking out to travel, the plug can be stored in the shell to avoid scratching luggage items. Add replacement pin structure, optional British regulations, European regulations, Australian standards three kinds of replacement accessories, to adapt to different countries and regions of the jack and power grid specifications.
Charging head net summary
IDMIX 140W Gallium Nitride charger is a new generation of charger developed using the PD3.1 fast charging standard, backward compatible with PD3.0, PD2.0, in addition to QC, AFC, FCP, SCP and other common fast charging protocols on the market, whether it is the new standard war in the future, or the current mainstream digital products, or old-fashioned devices, it can be well compatible with support and shake hands and fast charge.
The internal use of gallium nitride and silicon carbide new material chip, and the use of digital power technology with PFC + LLC architecture to create, the power density of 0.85W/ cm, compared with only a single interface apple 140W charger volume reduction of 25%. Supports global grid usage and travel replacement folding pin design for worry-free cross-regional travel.
Macbook Pro 16 2021 original machine supports PD3.1 140W fast charging, but Apple equipped with the original charger is huge, the weight is amazing, and the single-port charger is difficult to adapt to the charging needs of several digital products in today's hands. IDMIX 140W Gallium Nitride charger supports Macbook Pro 16 2021 full power fast charge, and with 2C1A three interfaces, mobile phones, tablets, notebook charging needs, an IDMIX is done, is the best accessory for Macbook Pro 16 2021 users.
At present, the IDMIX 140W Gallium Nitride charger is priced at 499 yuan, and it is currently opening a crowdfunding campaign in Jingdong, with a crowdfunding price of 369 yuan, and interested partners can go to the crowdfunding page to get a car.