Click on the "Included in Topics" category to view all.
Tip: The graphic information comes from the Internet, and the copyright belongs to the original author. The picture is not sure of the authenticity of the work, not as the basis for investment collection, only for everyone to share and learn, if the author believes that it involves infringement, please contact us, we will verify and delete it immediately.
Xie Zhiliu landscape
Tool preparation:
1. Brush (wolf pen, large and small white cloud pen)
2. Chinese painting pigments (common Marley Chinese painting pigments)
3. Paper (cheap bamboo paper or cooked rice paper)
4. Ink (yidege calligraphy and painting ink or grinding block can be)
5. Brick table (if it is not convenient, you can replace it with an ink dish)
6. Pen washing (with white porcelain bowl can also be used)
Drawing steps:
Demonstration of the single stone drawing method
1. Demonstration of the drawing method of a single stone:
1, when you start painting, first outline the outline of a larger stone, pay attention to the articulation and hooking of lines, in the modeling system of Chinese painting, the expression of the object space is dependent on the change of line texture and the first hooking to reflect the relationship between the front and the back, and pay attention to the stone structure in the process of outlining. To draw the texture of the stone, we must pay attention to the "three sides of the stone". "Stone is divided into three sides" is simply to express the volume of stone. This is called "yin and yang" in Chinese painting, and the yin and yang of the stone is the light of the stone being backlit, which is a pair of contradictory relationships. In the process of painting, we must pay attention to the fact that the lines and lines should not be too similar to the changes in thickness and shape, not too rigid, after outlining the texture of the stone, you can continue to rub the stone, where the stone rubbing is carried out with a short cloak, and the dyeing is carried out synchronously. Pay attention to not using too much water, and control the amount of dipping water. Keep the pen relatively dry, as shown in step 1 of the following figure:
Structural analysis
Step 1
2, start dyeing, before the dyeing begins to keep the water in the pool clean. Prepare two white cloud pens, one dipped in color and the other dipped in water to gradient the color. First use a pen to dip some ochre color, pay attention to the color to be thin and not too thick, dye it at the bottom of the stone, and pay attention to the color not to exceed the edge of the line so that it is beautiful. Then wash the pen to keep it moist, a pen dipped in some stone green, here the stone green is divided into several types (head green, two green, three green, etc.). The further back you go, the brighter the color becomes. Mix some water to dilute some stone green when dipping in color, here I use stone three green. The stone green coverage is stronger, compared to the water color such as flower green garcinia yellow, it is thicker, and it should be used slowly when used. After applying the three greens on the top of the stone, use a water pen to gradually blur the edges of the color so that the two colors connect naturally.
Step 2
3, after the color dries, if you feel that the three greens are not dyed enough. You can also follow step two to add another layer of three greens. This makes the color more thick. When the color is dry, paint a moss dot on top of the stone. Used to strengthen the structure of the stone. Pay attention to the points near the structural line when drawing moss points, pay attention to the density of the points, and there must be changes. In this way, the practice of a pair of stones is completed.
Step 3
Click: "Included in the topic" Next article, turn the page to read.