The new Lynk & Co 03 was exposed
Recently, the State Intellectual Property Patent Office exposed a set of new Lynk & Co 03 appearance patent drawings, according to the changes and related information, it should be a mid-term modification of Lynk & Co 03.
Although the design of the current Lynk & Co 03, which is currently on sale, has changed slightly during the annual redesign, it is basically an adjustment in details. This mid-term redesign, the appearance of the Lynk & Co 03 can change a lot, providing two appearance styles.
First of all, on the front face, the design of the daytime running lamp on the Lynk & Co cover is still the iconic Lynk & Co style, and the interior shape of the headlights below has changed, and the area has become smaller and narrower. The biggest change in the front face is in the lower part of the front of the car, the area of the lower air intake grille has increased a lot, and the interior uses a straight waterfall grille style, and the heat dissipation port design is added on both sides of the grille. The upper and lower segmented grilles of the current model are gone, and only a narrow air intake is retained between the two headlight groups.
The most obvious thing at the tail is that the taillights use a penetrating design, the style and the current model are also very different, the taillights are very slender, and the middle should be connected with the Lynk & Co LOGO. The diffuser size below has also been increased considerably. You can still see the small size spoiler, this version of the design uses a bilateral single exhaust.
The design of another style is much more radical, in the patent diagram can be seen on the engine compartment cover has been cut, two vents have been added, the exterior mirrors have also been designed with horns, the shape of the wheel hub is more sporty, the front lip and side skirt are added, the rear part of the encirclement is more exaggerated, and the exhaust is also changed to a bilateral double out. This version should be either a sport version or a 03+ design.
In addition, according to the previous disclosure, the new 1.5T three-cylinder engine of Lynk & Co 03 will be equipped with a new 1.5T four-cylinder engine, then the acceptance of the entry-level model should be greatly improved, before many people because the 1.5T version is a three-cylinder and the price of 2.0T is slightly expensive, if 1.5T also becomes a full series of four-cylinder, it will help the sales of Lynk & Co 03 will be greatly helped.
The Great Wall Diamond Cannon is listed
Yesterday, the Great Wall Cannon under the King Kong Gun officially listed, the new car price range of 8.88-12.38 million yuan, the whole series launched a total of 12 models, the new car will provide two kinds of power of firewood, gasoline, two and four-wheel drive two forms, TEU, long box, flat bottom cargo box three kinds of cargo box form.
First of all, let's talk about the difference between the King Kong gun and the Great Wall gun on the market, from the price we can also see that the price of the Great Wall Gun is from 97,800 yuan to 290,000 yuan, the coverage is very wide, the guidance price is from low to high, there are commercial models and off-road models.
The guidance price of the King Kong gun is similar to the original Fengjun 7 series of the Great Wall, mainly for the commercial market. It can not only meet the use of tool cars, but also be richer and younger in configuration and design, and a multi-purpose vehicle.
The appearance is the Great Wall pickup truck has always been a square design, even if the commercial main car looks very domineering. The new car has a length, width and height of 5635/1880/1815 (1840) mm and a wheelbase of 3410 mm. Among them, the dimensions of the cargo railing are 1820/1500/495 (470) mm respectively. At the same time, in the position of the fenders on both sides, we can see that they are equipped with fixed anchor points, and above the cargo compartment are also equipped with roll cages, which is very practical.
And its interior is not shabby at all. The dashboard and central control screen adopt a borderless suspension dual-screen design, and support the car networking system, the new car adopts gray red, black and gray two contrast color design, the interior does not appear monotonous. In terms of configuration, the new car will be equipped with intelligent voice, intelligent car control and FOTA functions according to different versions, and there are also 4 airbags, reversing radar, tire pressure monitoring and panoramic imaging in terms of safety.
Such a commercial pickup truck that costs about 100,000 yuan, the configuration of the family car is basically there, and its practicality and tool attributes can be much stronger than 100,000 SUVs.
In terms of power, the new car will be equipped with two kinds of power, the Great Wall 2.0T diesel engine and the 2.0T gasoline engine, of which the former has a maximum power of 163Ps, matching a 6-speed manual transmission; the latter has a maximum power of 197Ps, matching a 6-speed manual and 8-speed automatic transmission.
The domestic pickup truck market can be regarded as a great wall to play understood. Such a pickup truck that costs about 100,000 yuan, design, space, practicality, configuration, power are all-encompassing, if the city does not have pickup truck restrictions, I really want to make one to use. However, the current pickup truck model is still more suitable in urban areas, on the one hand, because of the restriction policy of pickup trucks, on the other hand, convenience. For areas with relaxed policies and convenient use of cars, such a multi-purpose pickup truck is really cost-effective.
BYD Han DM-i pre-sale price announced
Recently, BYD's attention is simply not too high. On the one hand, it is because of the hot sales of BYD, on the other hand, it is because OFD has released many new cars.
AS BYD's flagship sedan, BYD Han announced the pre-sale price of its DM-i model two days ago, of which the pre-sale price of Han DM-i was 216,800-292,800 yuan and the pre-price of Han DM-p was 322,800 yuan.
Han DM-i is equipped with a plug-in hybrid system composed of 1.5T engine + motor, with a maximum engine power of 139Ps, NEDC pure electric endurance of 121km and 242km, and a comprehensive endurance of 1300km.
The performance version of the DM-p is equipped with a front and rear dual motor system, the maximum power is 160kW and 200kW, 0-100km acceleration is only 3.7 seconds, and equipped with a four-wheel drive system, the performance is very good in terms of performance, its NEDC pure electric endurance of 202km, and DM-i are all standard blade batteries. But this performance version of dm-p because the hardware specifications are very high, the price is not cheap, the price after subsidies will go to 322,800 yuan, almost catching up with the price of the Model 3 high-performance version, this car should be more as a performance totem to highlight the role of ability, the real amount of walking also depends on the ordinary DM-i version.
In fact, I personally believe that the price of the entry-level model of Han DM-i is not expensive, and the starting price of 216,800 yuan is cheaper than the starting price of Han's original DM model, and the configuration is also comparable. If you look at BYD's DM-i system, this price is still very suitable, and it will also be the most important volume model in the future.
If you want the 242km version with the longest pure electric endurance, the price will go to nearly 300,000 yuan. At that time, when the official release is officially launched, if you can add a model with a lower entry price to this version with a longer pure electric endurance, the audience will be more.