【Electric Dog】
Now, lenovo Savior's official Weibo has released the specification table of the Savior Y series notebook. Includes two models: Y9000P 2022 and Y7000P 2022.
Both notebooks use 12th generation Core, 165Hz high screen brush screen, 16GB DDR5 4800MHz memory, 80Wh battery. In addition to the network, speakers, cameras, interfaces and other configurations are consistent, the screen and graphics card of the two core parameters, Y9000P completely crushed Y7000P, after all, the two games are not a level.
The Y9000P 2022 features a double-sided metal design with a 16-inch four-inch four-narrow-sided full-screen, 2560x1600 resolution, 500nit brightness, HDR400 certification, and support for Dolby Vision.
Processor-selectable i5-12500H and i7-12700H processors, graphics card optional RTX 3060 and RTX 3070 Ti, 16GB DDR5-4800 memory and 512GB PCIe 4.0 SSD as standard. 45+130/140W performance release can be achieved.
The Y7000P 2022 features an A-side metal design with a 15.6-inch full-face screen, 2560x1440 resolution, 300nit brightness, and support for Dolby Vision.
Processor-selectable i5-12500H and i7-12700H processors, graphics card optional RTX 3050 and RTX 3050 Ti, standard 16GB DDR5-4800 memory and 512GB PCIe 4.0 SSD for 45+95W performance release.
@Lenovo Savior Official Micro announced the detailed parameters of the Y90 game phone and Y700 game tablet in advance.
The Savior Y90 is equipped with a 6.92-inch E4 material OLED screen with 388PPI, supporting 144Hz refresh rate, 720Hz multi-finger sampling rate, up to 1300nits, and supporting DC dimming.
The top-of-the-air version has 18GB of RAM + 512GB of UFS3.1 flash memory, an additional 128GB of SSD, and will use a heterogeneous storage system. Using SSD and UFS 3.1 disks to form RAID 0 storage can improve random write performance by up to about 50%.
Rescuer Y90 is equipped with the exclusive research and development of dual engine air cooling technology, the maximum inlet and outlet air volume up to 180.65cm /s, plus PC-grade heat dissipation fin design, can quickly take away heat, so that Snapdragon 8 performance continues to stabilize output, built-in 5600mAh super battery, support 68W fast charging, also support WiFi6, Bluetooth 5.2, dual Dolby speakers, dual X-axis ultra-wideband linear motors and so on.
After Huawei officially released the AITO Q&A M5, the Huawei wallet App also recently opened the crowd test of the AITO car key function. According to reports, at present, users can click on the "wallet home page - card bag upper right corner '+' - key - car key" and select AITO car key to open.
After the digital car key is successfully activated, the NFC-enabled Huawei mobile phone will open the Bluetooth car key and the NFC car key at the same time, of which the NFC key can be used to open the car door and start the vehicle.
The specific operation is as follows:
Open the car door: the corresponding NFC swipe position is in the left ear NFC marker area of the car, and the mobile phone NFC swipe area is close to the car ear NFC area.
Start the vehicle: you can directly start the vehicle within 5 minutes of entering the car, and after more than 5 minutes, you need to place the mobile phone in the wireless charging area to complete an NFC swipe, and after successful card swiping, you can start the vehicle.
Sensorless unlocking switch path: AITO App - Digital car key - Click on the 4 dots in the upper right corner - open the Bluetooth non-latching switch.