As we all know, the space inside the smartphone is scarce.
In order to make the components more orderly arranged inside the fuselage and equipped with sufficient heat dissipation configuration, in recent years, the mainstream mobile phone brands can be described as racking their brains. With the continuous upgrading of consumer demand and hardware such as SOCs, manufacturers have gradually found that the limited internal space of mobile phones can no longer meet the increasingly high heat dissipation requirements. Some brands have a whim and start to start from the outside of the product to create a new heat dissipation accessory, such as the protagonist of today's article, Red Devil.
As one of the earliest brands involved in game mobile phone products in China, Red Devils has shown its unique insight into mobile phone heat dissipation. It drastically opened holes in its own mobile phone body and added a cooling fan. In order to achieve a more extreme heat dissipation effect, the Red Devils also proposed the concept of heat dissipation back clip. In today's Red Devil 7 game mobile phone conference, the new product of the Red Devil Turbo Cooling Back Clip has also officially met with consumers.
Previously, Red Devils has launched a variety of heat dissipation back clips, which are well received by the market and consumers. The Red Magic Turbo Cooling Back Clip has been upgraded again, introducing a turbocharged design in the automotive sector with a high-speed centrifugal fan. According to the official introduction, the number of high-speed centrifugal fan blades of the new product has reached a staggering 29 blades. Coupled with the centrifugal diversion design, the Red Devil turbo cooling back clamp wind speed is increased by 211%, and the noise value is significantly lower than that of the axial fan. At the same time, relying on the higher speed and air volume of the centrifugal fan, the Red Devil turbine heat dissipation back clip on the heat dissipation diameter can cover both sides of the fuselage and have a larger heat dissipation area. And that's not enough, the internal Red Devils turbine heat dissipation back clip uses a large size heat dissipation grille made of aviation aluminum, which has a wind duct spread area of 177 cm2. The attentive Red Devils also use noise reduction design in the air duct, so that the noise of the entire product when running is only 28db, which is significantly better than the international standard.
The combination of turbocharging + centrifugal fan is the first of the Red Devils. It has the advantages of large air volume, fast heat dissipation and low noise, and can cool down by up to 12 degrees under the load of mobile phones. As shown in the chart below, compared with the Black Shark Cooling Back Clip 2Pro, the Red Devil Turbo Heat Dissipation Back Clip leads in 7 aspects such as fan, cooling area, and radiator material, which can be called the rolling level.
In addition to the improvement of heat dissipation capacity, the Red Devil turbo cooling back clip continues the design of the fuselage of the small aircraft, with a delicate appearance and a weight of only 94g, and it does not block the hand when used. In addition, the Red Devil Turbo Cooling Back Clip supports Bluetooth connection to the Red Devil Equipment Library APP, where users can experience more user-friendly functions, such as setting a variety of RGB lighting effects.
Through the above content, I believe you have a deeper understanding of the Red Devil Turbo Cooling Back Clip. Whether compared with the previous generation of products or the same level of products of friends, the Red Devil Turbo Cooling Back Clip has significant hardware and heat dissipation advantages. The combination of turbocharging + centrifugal fan provides a new design idea for the industry. And more surprises about this product, waiting for you to personally dig into the experience.