At about 17 o'clock on January 28, 2024
Yunyang District, Shiyan City, Hubei Province
A fire broke out in a company's factory
The fire caused the company's production workshop
Exterior wall color steel tiles, PPH pipes, bath traps
PP丝网、鲍尔环填料等物品烧损
The direct property loss was 45,360 yuan
After investigation
The cause of the fire was Shi and Wang
In the company's production workshop kiln exhaust gas renovation project
During the welding operation at the construction site
High-temperature welding slag splashing ignites the kiln exhaust pipe
The combustible filler material inside the bath catcher pall ring caused a fire
Shi and Wang's behavior
It has constituted an offence of negligence causing a fire
March 7
Yunyang District Public Security Bureau of Shiyan Public Security Bureau
According to the Fire Protection Law of the People's Republic of China
Article 64, Paragraph 2
The offenders Shi and Wang
They were sentenced to 10 days of administrative detention
Once there is an accident in the illegal welding operation
At least it will ruin the wealth, and at worst it will kill you
Cautionary Cases
On the morning of March 11, 2024, an asphalt concrete company in Datian Community, Donghe Street, Jishou City, Hunan Province, caught fire, resulting in 2 deaths, 1 serious injury and 3 minor injuries. After the accident, the local fire, emergency, public security, street and other departments rushed to the scene to deal with it, and the injured people are being hospitalized.
Cautionary Cases
On January 24, 2024, a fire broke out on the basement floor of a shop along Jialeyuan, Tiangong South Avenue, Yushui District, Xinyu City, Jiangxi Province, killing 39 people and injuring 9 others. After preliminary investigation, the basement floor of the building is being renovated in cold storage, and the fire was caused by the illegal fire construction of the construction personnel.
Cautionary Cases
On January 13, 2024, a fire broke out in an automobile repair shop in Xiaocheng City, Hubei Province. It was found that Wan, the owner of the car shop, instructed Wang, an unlicensed welder, to carry out electrical welding operations in violation of regulations, and ignited the surrounding combustibles during construction to cause a fire. Wan and Wang's actions are suspected of violating the law. In accordance with the provisions of Article 64, Paragraph 2 of the Fire Protection Law of the People's Republic of China, the Yingcheng Municipal Public Security Bureau gave Wang an administrative punishment of 10 days of detention in accordance with the law.
Unlicensed welding
Failure to apply for approval for hot work
Surrounding combustibles are not removed during welding
These illegal welding operations are expressly prohibited!
Relevant Laws
Article 21 of the Fire Protection Law of the People's Republic of China stipulates that:
If it is necessary to use open flame for operation due to special circumstances such as construction, the examination and approval procedures shall be completed in advance in accordance with the regulations, and corresponding fire safety measures shall be taken, and the operators shall comply with the fire safety regulations.
Article 63 of the Fire Protection Law of the People's Republic of China stipulates that:
Anyone who uses an open flame to work in violation of regulations, or smokes or uses an open flame in a place where there is a risk of fire or explosion, may be given a warning or a fine of not more than 500 yuan, and if the circumstances are serious, he shall be detained for up to 5 days.
Article 64 of the Fire Protection Law of the People's Republic of China stipulates that:
Whoever instigates or compels others to violate fire safety regulations and work at risk shall be detained for not less than 10 days but not more than 15 days, and may also be fined not more than 500 yuan;
Start a fire safely
The following should be noted
↓↓↓
1. Implement the safety responsibility system step by step
Strict safety management of the construction site, the implementation of the safety responsibility system step by step, the division of labor and responsibilities of personnel, strengthen the review of the construction operators, and strictly control the safety measures.
2. Welding operations are strictly prohibited in the business premises
In crowded places that are in business and use, it is forbidden to carry out construction and maintenance operations with fire hazards, such as electric welding, gas welding, gas cutting, grinding wheel cutting, painting, etc.
3. Operators must be certified to work
The construction unit must use hot operators who have passed the national formal training examination, and the welding and cutting operation items must be consistent with the qualification certificates in the special type of work operation certificate obtained by it.
4. Clean up combustibles before operation
Before operation, the surrounding combustibles should be moved to a safe place, and if they cannot be moved, they can be covered with non-combustible materials.
5. Equipped with fire extinguishing equipment during operation
Fire extinguishing equipment should be equipped for on-site welding, cutting, baking or heating and other hot operations, and fire guardians should be set up.
6. Completely eliminate the fire at the end of the operation
After the construction operation, the fire should be eliminated immediately, the work site should be thoroughly cleaned up, and the supervision should be carried out for a period of time, and then leave the site without problems, so as to leave no hidden dangers.
Avoid fire
No fire hazards
It is necessary to take precautions from the source