Hello old irons, today I will introduce a replica of a certain sound's hottest antique machine: Canada's Bombardier semi-automatic safety catapult, a version of the same 398 high model, and a one-to-one replica of Lao Xia. First of all, this machine is a replica of foreign antique machines, all of which use CNC machining rather than casting, and the CNC process is the best, and the price is the lowest in the whole network.
First of all, tell the old irons about the brass machine, the brass machine has CNC, that is, the whole copper block is hollowed out, the copper block hollowed out is definitely better than the stamping casting, but its cost will be high, and the brass is also divided into grades, there are national standards, there are follow-up aluminum doped, there are follow-up zinc doped.
A really good brass machine at first glance looks like its color is also yellowish when it is just polished, and it will not be white. If a machine receives a whitish color, it must be adulterated with its brass, and its price will definitely be low. This is done with normal national standard brass.
Look at this color, including the details, the whole machine is made of brushed grain, the surface has done anti-oxidation treatment, which is 398 meters cheaper than normal. This machine just came out in a certain sound, very hot, can't grab it, every night is limited, today to a wave of minimum benefits.
The whole network compared the market with 398, the lowest price 168, there are less than a hundred or so in hand, sold out and gone. Its machine size is very large, larger than Esprí, and different from the process used by Esprí. Espri has a lot of batches, is casting, mold casting, and this one uses CNC hollowing, the inside can be seen, these CNC patterns are all CNC knife out, and the key parts are made of stainless steel of three units.
Look at the bottom plate is also three units six stainless steel, including the most popular flint rod are made of stainless steel, seemingly small but actually increased cost, very much. The design is different, the process is different, and the material is different. Look at the spring elasticity of high-carbon steel, and look at the thickness is much more convex than Esprey. Old Xia Seiko version, this position screw is unscrewed and replaced with flint, here after wiping to replace the fire wheel, including the size of the upper rod, these additions are different. Benchmarking against the highest 398 version on the market, giving the province more than two hundred but the quantity is limited, and it is not done after selling out. Length 6.2, width is 3.3, thickness 1.2. GB brass plus 316 stainless steel, good brass is yellow without any beauty.
Take out the live broadcast room and take a look, the good brass is yellowed, there is no editing, you click the exhibition hall to ignite. The ignition method is the same as the replica antique machine Espre, the earliest previous Espri antique machine is the button press ejection, press ejection to fire, no need to pick the wheel, hand pick the cover press ejection, the feel is very good.
The upper cover is made of a snap cap, buckling the tooth muscle to prevent enzyme volatilization, you can also pick it by hand, pick it by hand, press ejection, and refueling at the bottom is very simple. The bottom is with a sealing ring, plug-in design, there is a flint rod, the flint rod can also be unscrewed off if it is not used, can be used as a quick release, so that it is quick release and refueling.
From this hole to fill up the oil, after filling up the oil, it has a cotton core, for example, when you light a cigarette for a friend, you pursue a trick to put this flint rod on it, first fire, after the fire, take the flint rod down and light the fire, so that it can be lit on the line.
