Can break the cells, are you serious? Tasks can be accomplished with these devices
In the starch production process, the fragmentation of potatoes (or sweet potatoes) is crucial. The process is to break up potato cells and release the starch in the cells.
The equipment used is called a filing mill, and there are also called grafters. The structure is simple, a high-speed rotating roller, the outer circle is covered with a knife slot, and the knife holder and blade are installed inside the knife slot. Blades are like saw blades, some people call saw blades, there are teeth on both sides, one side is worn, and it is used on the other side.
This equipment was first imported from the Netherlands, and later domestically produced.
There are two structures; one is belt drive, the rotor diameter is 835mm, there are 120 blades, the linear speed is 91.8m/s, and the other is a direct-linked structure, the rotor diameter is 1050mm, 204 blades are installed, and the linear speed of the rotor outer circle is 81.6m/s.
The structure of The Direct Link is represented by the products of the Swedish Larson Company. The knife groove machining is complex but delicate.
The structure of the belt drive is represented by the former Holland Holwe company, and the tool groove processing is simple.
It is with such equipment, the high-speed rotating rotor drives the blade, the cell wall of the potato (or sweet potato) is broken, the fresh potato is ground into a pulp, the starch is free, and then through the sieve, the starch and the residue are separated, and the starch extraction process is completed
Is it the same as you imagined? Welcome to leave a message to discuss.
